When low cost and dependability are essential, you can count on the Falcon 19 Series. The 19 Series is built to stand up in high traffic applications and is available with a wide...
Search Results "Means of Entry"
-
Allegion Falcon 19 Series Exit Devices
-
Allegion Von Duprin 55 Series Cross Bar Exit Devices
5575 mortise lock devices for all types of single and double doors. UL listed for accident hazard installations. The 5575 mortise lock is equipped with a 3/4" (19mm)...
-
Corbin Russwin Inc. ED5000 Series Exit Device
Quality All exit devices manufactured by Corbin Russwin undergo rigorous testing, both in the lab and field. Testing procedures go beyond industry standards; the ED5800 concealed...
-
SDC Sure Exit® PSB560 REX Pressure Sense Exit Bar
Stable and Reliable Pressure Sense Technology Building codes essentially state that egress through access controlled doors must not require prior knowledge of operational...
-
CRL Jackson 1200 Series Push Pad Door Exit Devices
08 7100 CRL Jackson 20 Series Push Pad Door Exit Devices For 1-3/4" Narrow, Medium, and Wide Stile Aluminum, Wood or Hollow Metal Doors "Soft-Touch" Smooth Action...
-
TownSteel TS8000 Grade 2 Fire Rim Device
TS5000 series is a grade 2 rim device and UL listed as fire hardware. SPECIFICATION Application For single or double door Door Thickness 1-3/8" - 2", specify when other...
-
Stanley QED 100 Series Grade 1 Extra Heavy Duty Exit Devices
All Stanley exit devices are manufactured to heavy duty, architectural grade expectations and meet or exceed ANSI Grade 1 specifications. In addition, all exit devices are offered in...
-
Allegion Falcon XX Series Cross Bar Exit Devices
For high use areas that demand high-performing products, the Falcon XX Series fills the bill with a sleek, tough and attractive exit device that delivers ANSI Grade 1 performance....
-
1011.4, Item 3
Each exit door that is required to comply with Section 1011.1, and that leads directly to a grade-level exterior exit by means of an exit enclosure or an exit passageway shall be identified...
-
1013.4, Item 3
Each exit door that is required to comply with Section 1013.1, and that leads directly to a grade-level exterior exit by means of an exit enclosure or an exit passageway shall be identified...
-
1010.1.7 Thresholds
The door is not part of the required means of egress. 1.2. The door is not part of an accessible route as required by Chapter 11A or 11B. 1.3....
-
1010.1.9.8.1 Delayed egress locking system
Once the delay electronics have been deactivated, rearming the delay electronics shall be by manual means only....
-
207.1 General
Means of egress shall comply with section 1003.2.13 of the International Building Code (2000 edition and 2001 Supplement) or section 1007 of the International Building Code (2003 edition...
-
1007.7.2 Outdoor facilities
Every required exterior area of assisted rescue shall have direct access to an interior exit stairway, exterior stairway, or elevator serving as an accessible means of egress component....
-
1010.1.9.7 Delayed egress locks
Once the delay electronics have been deactivated, rearming the delay electronics shall be by manual means only....
-
404.3.6 Break Out Opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (815 mm) minimum when operated...
-
404.3.6 Break Out Opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (815 mm) minimum when operated...
-
Section 36.303(g)(6) Alternative Technologies
Open movie captioning at some or all showings of movies is never required as a means of compliance with this section, even if it is an undue burden for a theater to exhibit movies with closed...
-
11B-404.3.6 Break out opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (813 mm) minimum when operated...
-
11B-404.3.6 Break out opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (813 mm) minimum when operated...
-
11B-404.3.6 Break out opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (813 mm) minimum when operated...
-
404.3.6 Break Out Opening
Where doors and gates without standby power are a part of a means of egress, the clear break out opening at swinging or sliding doors and gates shall be 32 inches (815 mm) minimum when operated...
-
M303.3.3.3 Clear Width
The clear width of ramp runs shall be 36 inches (915 mm) minimum.
-
M303.3.3.1 Running Slope
Ramp runs shall have a running slope not steeper than 1:12. EXCEPTION: A running slope not steeper than 1:8 shall be permitted for ramp runs with a maximum height of 2 ½ inches...
