Flangeway gaps at pedestrian at-grade rail crossings shall be 64 mm (2.5 in) maximum on non-freight rail track and 75 mm (3 in) maximum on freight rail track....
Search Results "Dune Crossing"
-
R302.7.4 Flangeway Gaps
-
STREETS, ROADS AND WALKWAYS {35.150}
entity has responsibility or authority over streets, roads, or walkways, its transition plan shall include a schedule for providing curb ramps or other sloped areas where pedestrian walks cross...
-
Shower Spray Unit
However, comments from the plumbing industry indicated that the requirement, as worded, would pose cross connections and thermal shock hazards and would conflict with model codes and industry...
-
1015.2 Where required
In assembly seating areas at cross aisles in accordance with Section 1029.12. On the loading side of station platforms on fixed guideway transit or passenger rail systems....
-
American Safety Tread Co., Inc. E- Cast Metal Safety Stair Nosing Style 816
Surface Design: Cross Hatched Non-Slip cast metal stair nosing with #24 virgin grain Silicon Carbide abrasive granules embedded into the walking surface while the matrix is in a molten...
-
7 [§ 4.7.8]
If the curb ramp you are surveying is along a public right-of-way or at a pedestrian crossing, vehicles should be prohibited from parking directly in front of the curb ramp on the street...
-
Section 36.405 Alterations: Historic Preservation
Because those cross-references to the 1991 Standards are no longer applicable, it is necessary in this final rule to provide new regulatory text....
-
M301.3.1 Transfer Supports (Section-by-Section Analysis)
The only change in the final rule was to update the cross reference to applicable transfer surfaces to accommodate the changes made to transfer surfaces, described above in Section IV.B.1...
-
R304.3.1 Turning Space
The 1.5 m (5.0 ft) dimension shall be provided in the direction of the pedestrian street crossing....
-
Extensions
Extensions are not required in alterations if they project into cross circulation paths. Extensions must be rounded or returned to the walls, floors, or posts....
-
Suggestions by Jean Tessmer
For cross slopes, measurements should be taken every 6 feet....
-
M303.3.3 Ramped (Section-by-Section Analysis)
with a change in level at the entry of a wheelchair space, level changes greater than ½ inch high would be required to be ramped and comply with technical requirements for running slope, cross...
-
INFORMATION REQUIREMENTS OF PEDESTRIANS WITH VISION DISABILITIES
Previous research has shown that at many roundabout crossings a substantial number of drivers fail to yield to apparently blind pedestrians (4) (5)....
-
11B-406.5.3 Landings
Section 11B-403.5.1, Exception 3, requires walks and sidewalks to be 48” wide minimum; Section 11B-403.3 requires walks and sidewalks to have a cross-slope of 1:48 or less....
-
III-7.4300 Parking
Accessible parking spaces and the required accessible route should be located where individuals with disabilities do not have to cross vehicular lanes or pass behind parked vehicles to have...
-
1.3 Previous Research
or ramp. 1.3.2 Detectable Warnings May Provide Visual Guidance Pedestrians who are visually challenged often have difficulty locating crosswalks, properly aligning themselves to cross...
-
Standing Supports (M304.3 and M305.3)
• Grab bars with non-circular cross sections must have a cross section dimension of 2 inches maximum and a perimeter dimension of 4 inches minimum and 4.8 inches maximum....
-
221.9 Stadium Style Movie Theaters
Wheelchair spaces and companion seats shall be located on a riser or cross-aisle in the stadium section that satisfies at least one of the following criteria: (i) It is located within the...
-
Where must curb ramps be provided?
Generally, curb ramps are needed wherever a sidewalk or other pedestrian walkway crosses a curb....
-
11B-302.3 Openings
Clearance|_, 11B-409.4.3 _|Platform to Hoistway Clearance|_, 11B-410.4 _|Platform to Runway Clearance|_, 11B-810.5.3 _|Platform and Vehicle Floor Coordination|_ and 11B-810.10 _|Track Crossings...
-
Light Rail Platform Slope
The Board has explicitly specified that rail platforms shall slope no more than 1:48 in any direction, consistent with cross slope provisions for walking surfaces in section 403....
-
Other Features
actuation indicators (a light or beep), tactile crosswalk maps, and options activated by an extended button push: audible beaconing (useful for directional guidance at irregular or long crossings...
-
405.7 Landings
Curvilinear ramps with small radii also can create compound cross slopes and cannot, by their nature, meet the requirements for accessible routes....
-
Section 36.405 Alterations: Historic Preservation (Section-by-Section Analysis)
Because those cross-references to the 1991 Standards are no longer applicable, it is necessary in this final rule to provide new regulatory text....
