Signs required by Chapter 10, Section 1009.10 to provide directions to accessible means of egress shall comply with Section 11B-703.5 _|Signs; Visual Characters|_.
Search Results "ALS Signage"
Filters
Commonly Searched Documents
-
11B-216.4.3 Directional signs
-
11B-216.4.3 Directional signs
Signs required by Chapter 10, Section 1009.10 to provide directions to accessible means of egress shall comply with Section 11B-703.5.
-
Figure 703.7.2.4 International Symbol of Access for Hearing Loss – Drawing from the U.S. Access Board
-
Seton Directional Signs - Accessible Route with ISA and Arrow
Each sign is carefully engraved with the ISA symbol Setonply® is a tough, stain-resistant multi-layered acrylic and cleans easily with a damp cloth 12"W x 4"H signs are...
-
Signaids Floor Numbering and Stair Shaft Designation-Style 2
FLOOR NUMBERING & STAIR SHAFT DESIGNATION - Braille and Tactile Style 2 - 240mm x 240mm - Gr. 1 Braille and Tactile sign - AODA Compliant (Canada) -...
-
Signaids Floor Numbering and Stair Shaft Designation-Style 1
FLOOR NUMBERING & STAIR SHAFT DESIGNATION - Braille and Tactile Style 1 - 190mm x 130mm - Gr. 1 Braille and Tactile sign - AODA Compliant (Canada) - Available in 3...
-
International Symbol of Accessibility: ADA Standard Section 703.7.2.1
The International Symbol of Accessibility shall comply with Figure 703.7.2.1.
-
Rail Station Signs: ADA Standard Section 810.6
Rail station signs shall comply with 810.6. EXCEPTION. Signs shall not be required to comply with 810.6.1 and 810.6.2 where audible signs are remotely transmitted to hand-held...
-
11B-810.6 Rail station signs
Rail station signs shall comply with Section 11B-810.6. Exception: Signs shall not be required to comply with Sections 11B-810.6.1 and 11B-810.6.2 where audible signs are remotely...
-
11B-812.8.7 Location
Required identification signs shall be visible from the EVCS it serves. Signs shall be permanently posted either immediately adjacent to the vehicle space or within the projected...
-
11B-812.8.4 Ambulatory
Ambulatory EVCS shall not be required to be identified by an ISA.
-
11B-502.8.2 Lettering
The additional sign shall clearly state in letters with a minimum height of 1 inch (25 mm) the following: "Unauthorized vehicles parked in designated accessible spaces not...
-
11B-502.8.1 Size
The additional sign shall not be less than 17 inches (432 mm) wide by 22 inches (559 mm) high.
-
11B-812.8.6 Finish and size
Identification signs shall be reflectorized with a minimum area of 70 square inches (45161 mm2).
-
11B-502.8 Additional signs
An additional sign shall be posted either; 1) in a conspicuous place at each entrance to an off-street parking facility or 2) immediately adjacent to on-site accessible parking and...
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack.
-
F219.2 Required Systems
In each assembly area where audible communication is integral to the use of the space, an assistive listening system shall be provided. EXCEPTION: Other than in courtrooms,...
-
Paragraph (h) Non-interference with hearing technologies (Section-by-Section Analysis)
Paragraph (h) Non-interference with hearing technologies (Section-by-Section Analysis) Comment. Persons with hearing impairments uniformly supported this provision. Manufacturers,...
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack. [ECTCR UFAS 4.33.7]
-
219.2 Required Systems
In each assembly area where audible communication is integral to the use of the space, an assistive listening system shall be provided. EXCEPTION: Other than in courtrooms,...
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack.
-
15. Q: When would an officer use an assistive listening device as a communication aid?
A: Assistive listening systems and devices receive and amplify sound and are used for communicating in a group setting with individuals who are hard of hearing. At...
-
219.2 Required Systems
219.2 Required Systems. In each assembly area where audible communication is integral to the use of the space, an assistive listening system shall be provided. EXCEPTION: Other...
-
706.2 Receiver Jacks
706.2 Receiver Jacks. Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack.
