The floor or ground surface of wheelchair spaces shall comply with 302. Changes in level are not permitted. EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
Search Results "Smooth Surface"
-
Floor or Ground Surface: ADA Standard Section 802.1.1
-
Smooth Surface
Section 404.2.10 requires that swinging doors and gates have a smooth surface on the push side that extends their full width....
-
10.3.1(7)*
Gates which must be pushed open by wheelchair or mobility aid users shall have a smooth continuous surface extending from 2 inches above the floor to 27 inches above the floor and shall...
-
Tread Surface: ADA Standard Section 504.4
Section 504.4 covers the current ADA Standards for the tread surfaces on stairways.
-
Floor or Ground Surface: ADA Standard Section 404.2.4.4
Section 404.2.4.4 covers the current ADA Standards for floor or ground surfaces at door maneuvering clearances.
-
Extended Floor or Ground Surface: ADA Standard Section 405.9.1
Section 405.9.1 covers the current ADA Standards for extended floor or ground surface of the ramp run or landing.
-
Surface Hazards: ADA Standard Section 609.5
Section 609.5 covers the current ADA Standards for the surfaces of grab bars and adjacent surfaces.
-
Sargent NB8700 Top Latch Surface Vertical Rod Exit Device
Surface Vertical Rod Less Bottom Rod Exit Device is for both rated and non-rated openings....
-
Opening Doors From a Wheelchair Video
Requires the Registered User plan or above. Login! -
Rollability and Smoothness of Walking Surfaces
Rollability and Smoothness of Walking Surfaces Rollability refers to the ease and comfort with which pedestrians using wheelchairs and other wheeled mobility devices can travel on walking...
-
Openings: ADA Standard Section 302.3
Section 302.3 covers the current ADA Standards for floor and ground surface openings.
-
Sargent 8700 Surface Vertical Rod Exit Device
The SARGENT 8700 Surface Vertical Rod Exit Device has two point latching (top and bottom of the door) and is adjustable through the center case....
-
Exposed Surfaces: ADA Standard Section 804.3.3
There shall be no sharp or abrasive surfaces under the work surface counters....
-
11B-403.2 Floor or ground surface
Floor or ground surfaces shall comply with Section 11B-302....
-
11B-403.2 Floor or ground surface
Floor or ground surfaces shall comply with Section 11B-302....
-
TotTurf® and Robertson Industries Poured Rubber Surfaces
Poured rubber offers a seamless, colorful surface that is appropriate for a variety of indoor and outdoor applications....
-
11B-804.3.3 Exposed surfaces
There shall be no sharp or abrasive surfaces under the work surface counters....
-
11B-804.3.3 Exposed surfaces
There shall be no sharp or abrasive surfaces under the work surface counters....
-
Kitchen Work Surface: ADA Standard Section 804.3
In residential dwelling units required to comply with 809, at least one 30 inches (760 mm) wide minimum section of counter shall provide a kitchen work surface that complies with 804.3....
-
Don-Jo Mfg., Inc. Vertical Rod Protector 83
Number 83 Description Latch Bolt...
-
Architectural Builders Hardware 1811 Vertical Rod Protectors
Assist in accessibility conformance. Use in hospitals and schools, etc. 18 GA. #304 Stainless Steel #4 satin finish. Installs with #6 x 3/4" screws directly into the...
-
Sargent LS8600 Low Profile Center and Top Latch Concealed Vertical Rods Exit Device
SARGENT manufactures a fine line of exit devices providing the best combination of strength, durability, simplicity, aesthetics and innovation. The LS8600 has security of a stainless...
-
Don-Jo Mfg., Inc. Vertical Rod Protector 85
Product Specifications Number 85 Description Rod...
-
Don-Jo Mfg., Inc. Vertical Rod Protector 81
Product Specifications Number 81 Description Latch Bolt...
