(e) Existing cars retrofitted to meet the seating requirements of §37.91 of this title shall comply with §38.113(e), §38.123, §38.125(d) of this part and shall have at least one door on...
Search Results "Passenger Coach Car"
Filters
Commonly Searched Documents
-
§ 38.111(e)
-
§ 37.87 Purchase or lease of used intercity and commuter rail cars
[56 FR 45621, Sept. 6, 1991, as amended at 58 FR 63102, Nov. 30, 1993]
-
§ 38.125(d)(3) Other spaces
Spaces for individuals who wish to transfer shall include a regular coach seat or dining car booth or table seat and space to fold and store the passenger's wheelchair....
-
§ 37.3 Commuter rail car
Commuter rail car means a rail passenger car obtained by a commuter authority for use in commuter rail transportation....
-
Car Designations: ADA Standard Section 407.2.3.2
Section 407.2.3.2 covers the current ADA Standards for elevator car designations.
-
§ 38.111(a)(2)
(2) Single-level dining and lounge cars shall have at least one connecting doorway complying with §38.113(a)(2) of this part connected to a car accessible to persons using wheelchairs or...
-
§ 38.125(b)(2)(iii) Exception
The brake or propulsion system interlocks requirement does not apply to platform mounted or portable lifts provided that a mechanical, electrical or other system operates to ensure that cars...
-
Golf Car Passage
A continuous passage on which a motorized golf car can operate....
-
Section 37.93 One Car Per Train Rule
Section 37.93 One Car Per Train Rule This section implements the statutory directive that all rail operators (light, rapid, commuter and intercity) have at least one car per train accessible...
-
§ 38.125(b)(2) Controls
(2) Controls—
-
§ 38.125(b)(4) Power or equipment failure
(4) Power or equipment failure. Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding...
-
§ 38.125(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during...
-
§ 38.125(b)(11) Boarding direction
(11) Boarding direction. The lift shall permit both inboard and outboard facing of wheelchairs and mobility aids.
-
§ 38.125(c)(7) Stowage
A compartment, securement system, or other appropriate method shall be provided to ensure that stowed ramps or bridge plates, including portable ramps or bridge plates stowed in the passenger...
-
§ 38.125(b)(2)(i) Requirements
The controls shall be interlocked with the car brakes, propulsion system, or door, or shall provide other appropriate mechanisms or systems, to ensure that the car cannot be moved when the...
-
§ 38.115(b)
(b) Where provided, handrails and stanchions shall be sufficient to permit safe boarding, on-board circulation, seating and standing assistance, and alighting by persons with...
-
§ 38.125(b)(9) Platform deflection
The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of car roll) in any direction between its unloaded position and its position when loaded...
-
49 CFR Part 38 - Transportation for Individuals With Disabilities at Intercity, Commuter, and High Speed Passenger Railroad Station Platforms; Miscellaneous Amendments
DEPARTMENT OF TRANSPORTATION 49 CFR Parts 37 and 38 [Docket OST–2006–23985] RIN 2105–AD54 Transportation for Individuals With Disabilities at Intercity, Commuter, and High Speed Passenger...
-
General: ADA Standard Section 503.1
Section 503.1 of the ADA Standards covers information in the current ADA Standards for passenger loading zones.
-
12162(a)(4) Food service
(4) Food service
-
§ 38.125(b)(7) Platform gaps
When the lift is at car floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and car floor shall not exceed 1/2 inch horizontally...
-
12184(c)(1) Exception
Exception To the extent that compliance with subsection (a)(2)(C) or (a)(7) of this section would significantly alter the historic or antiquated character of a historical or antiquated rail passenger...
-
§ 38.111(a)(3)
(3) Bi-level dining cars shall comply with §§38.113(a)(2), 38.115(b), 38.117(a), and 38.121 of this part....
-
Type: ADA Standard Section 209.2
Section 209.2 covers scoping requirements in the most current ADA Standards for the different types of passenger loading zones.