Landings at the top and bottom and intermediate landings, must be at least 60 inches long so maneuvering space is available for approaching ramps straight on....
Search Results "Landing"
-
Landings [4.8.4]
-
11B-405.9 Edge protection
Edge protection complying with 405.9.1 or 405.9.2 shall be provided on each side of ramp runs and at each side of ramp landings....
-
11B-405.9 Edge protection
Edge protection complying with 405.9.1 or 405.9.2 shall be provided on each side of ramp runs and at each side of ramp landings....
-
405.7 Landings
Ramps shall have landings at the top and the bottom of each ramp run. Landings shall comply with 405.7. Advisory 405.7 Landings....
-
Edge Protection: ADA Standard Section 405.9
Section 405.9 covers the current ADA Standards for edge protection at ramps.
-
Doorways: ADA Standard Section 405.7.5
Section 405.7.5 covers the current ADA Standards for doorway maneuvering clearance at ramp landings.
-
405.7 Landings
Ramps shall have landings at the top and the bottom of each ramp run. Landings shall comply with 405.7. Advisory 405.7 Landings....
-
1.2.3 Landings
1.2.3 Landings. Both measurements of ramp landings as described in Section 1.1.15 should not exceed a plus tolerance of 0.5%....
-
11B-405.7.1 Slope
Landings shall comply with Section 11B-302. Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved....
-
11B-405.7.1 Slope
Landings shall comply with Section 11B-302. Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved....
-
11B-405.7 Landings
Ramps shall have landings at the top and the bottom of each ramp run. Landings shall comply with Section 11B-405.7. [2010 ADAS] Advisory 405.7 Landings. ...
-
11B-405.7 Landings
Ramps shall have landings at the top and the bottom of each ramp run. Landings shall comply with Section 11B-405.7. [2010 ADAS] Advisory 405.7 Landings....
-
11B-405.7 Landings
Ramps shall have landings at the top and the bottom of each ramp run. Landings shall comply with Section 11B-405.7. Advisory 11B-405.7 Landings....
-
Can handrails overlap ramp landings?
Along runs and landings, the minimum clear width must be measured between the leading edge of handrails....
-
f-iv
Does the ramp have a level landing at the top and bottom of each ramp section that is at least 60 inches long?...
-
11B-411.2 Elevator landing requirements
Elevator landings shall comply with Section 11B-411.2....
-
11B-411.2 Elevator landing requirements
Elevator landings shall comply with Section 11B-411.2....
-
11B-411.2 Elevator landing requirements
Elevator landings shall comply with Section 11B-411.2....
-
11B-405.7.2.1
Top landings shall be 60 inches (1524 mm) wide minimum. Advisory 11B-405.7.2.1 Top landing width....
-
Doorways at Landings [§405.7.5]
Doorways at Landings [§405.7.5] Required door maneuvering clearances can overlap ramp landings (it is advisable to locate the swing of doors outside ramp landings for greater safety)....
-
4.8.4(3)
(3) If ramps change direction at landings, the minimum landing size shall be 60 in by 60 in (1525 mm by 1525 mm)....
-
11B-410.4 Platform to runway clearance
The clearance between the platform sill and the edge of any runway landing shall be 1¼ inch (32 mm) maximum....
-
11B-410.4 Platform to runway clearance
The clearance between the platform sill and the edge of any runway landing shall be 1¼ inch (32 mm) maximum....
-
Wet Conditions [§405.10]
Wet Conditions [§405.10] Landings subject to wet conditions must be designed to prevent the accumulation of water....