Some existing measurement protocols Currently there are no generally accepted measurement protocols for determining the slope, flatness, or waviness of floor surfaces in terms of...
Search Results "Cane Technique"
Filters
Commonly Searched Documents
-
Some existing measurement protocols
-
Waviness Index
Waviness Index The Waviness Index, ASTM E 1486, Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria, was developed in response to...
-
11B-308.1.2 Electrical receptacle outlets
Electrical receptacle outlets on branch circuits of 30 amperes or less and communication system receptacles shall comply with Section 11B-308 except the low reach shall be measured...
-
11B-308.1.1 Electrical switches
Controls and switches intended to be used by the occupant of a room or area to control lighting and receptacle outlets, appliances or cooling, heating and ventilating equipment,...
-
11B-308.1.2 Electrical receptacle outlets
Electrical receptacle outlets on branch circuits of 30 amperes or less and communication system receptacles shall comply with Section 11B-308 except the low reach shall be measured...
-
11B-308.1.1 Electrical switches
Controls and switches intended to be used by the occupant of a room or area to control lighting and receptacle outlets, appliances or cooling, heating and ventilating equipment,...
-
307.2 Protrusion Limits
When a cane is used and the element is in the detectable range, it gives a person sufficient time to detect the element with the cane before there is body contact....
-
11B-307.2 Protrusion limits
When a cane is used and the element is in the detectable range, it gives a person sufficient time to detect the element with the cane before there is body contact....
-
11B-307.2 Protrusion limits
When a cane is used and the element is in the detectable range, it gives a person sufficient time to detect the element with the cane before there is body contact....
-
307.2 Protrusion Limits
When a cane is used and the element is in the detectable range, it gives a person sufficient time to detect the element with the cane before there is body contact....
-
11B-307.2 Protrusion limits
When a cane is used and the element is in the detectable range, it gives a person sufficient time to detect the element with the cane before there is body contact....
-
307.2 Protrusion Limits
When a cane is used and the element is in the detectable range, it gives a person sufficient time to detect the element with the cane before there is body contact....
-
E2-c
Are any interior stairs along these routes configured with a cane-detectable warning or a barrier that prevents travel into the area with less than an 80-inch high head clearance so that...
-
Standard Units
Standard Units Units at conventional heights for use by standees are considered accessible to people who may bend or stoop with difficulty. It is important that cantilevered units...
-
Hallways
These objects may pose hazards to voters with vision disabilities, who may bump into them if they are not detectable by a sweep of a cane....
-
Do drinking fountains pose hazards as protruding objects?
This is not required for wheelchair accessible units with no more than a 27” clearance below (the minimum required for knee clearance and the maximum recognized for cane detection)....
-
Accessible Sidewalks 4: Pedestrians who are Blind
Requires the Registered User plan or above. Login! -
Grab Bar Height
Comment. Commenters pointed out the proposed rule was not clear on whether the height of grab bars was to be measured to the top or to the centerline. Response. The Board has...
-
T102.3 Vehicle Length
The length of non-rail vehicles shall be measured from standard bumper to standard bumper.
-
3. Measuring Door Openings
3. Measuring Door Openings Special care is needed when measuring the clear opening of a doorway. To measure the clear opening of a standard hinged door, open the door to 90...
-
F - number system
F - number system The F - number system, ASTM E 1155, Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers, was developed primarily to aid in the...
-
Haws Fountain Skirt SK3
Model SK3 is a wrap around satin finish stainless steel cane touch skirt for installation on the high unit to comply with ADA protruding objects guidelines....
-
Haws Fountain Skirt SK3HPS
Model SK3HPS is a wrap around matching high polished finished stainless steel cane touch skirt for installation on the high unit to comply with ADA protruding objects guidelines....
-
Haws Fountain Skirt SK1
Model SK1 is a wrap around matching satin finish stainless steel cane touch skirt for installation on the high unit to comply with ADA protruding objects guidelines....
