Section 216.9.1 covers scoping requirements in the current ADA Standards for TTY identification signs.
Search Results "ANI: Automatic Number Identification"
Filters
Commonly Searched Documents
-
Identification Signs: ADA Standard Section 216.9.1
-
11B-404.3 Automatic and power-assisted doors and gates
Automatic doors and automatic gates shall comply with Section 11B-404.3. Full-powered automatic doors shall comply with ANSI/BHMA A156.10....
-
Automatic Door Break Out Openings
Automatic Door Break Out Openings. The 1991 Standards do not contain any technical requirement for automatic door break out openings....
-
A4.13.12 Automatic Doors and Power-Assisted Doors
Sliding automatic doors do not need guard rails and are more convenient for wheelchair users and visually impaired people to use....
-
A4.13.12 AUTOMATIC DOORS AND POWER-ASSISTED DOORS
Sliding automatic doors do not need guard rails and are more convenient for wheelchair users and visually impaired people to use....
-
1023.9 Stairway identification signs
In addition to the stairway identification sign, raised characters and braille floor identification signs that comply with Chapter 11A, Section 1143A or Chapter 11B shall be located at the...
-
1003.2.13.7.3 Identification
Section 1003.2.13.7.3 Add new sections as follows: (E22-00) 1003.2.13.7.3 Identification. Exterior areas for assisted rescue shall comply with Section 1003.2.13.5.5....
-
4.13.12* AUTOMATIC DOORS AND POWER-ASSISTED DOORS
If an automatic door is used, then it shall comply with American National Standard for Power-Operated Doors, ANSI A156.10-1979....
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall provide a clear, unobstructed opening of 32 inches (813 mm) with one leaf positioned at an angle of 90 degrees from...
-
11B-502.8 Additional signs
An additional sign shall be posted either; 1) in a conspicuous place at each entrance to an off-street parking facility or 2) immediately adjacent to on-site accessible parking and...
-
11B-502.8.2 Lettering
The additional sign shall clearly state in letters with a minimum height of 1 inch (25 mm) the following: "Unauthorized vehicles parked in designated accessible spaces not...
-
11B-502.8.1 Size
The additional sign shall not be less than 17 inches (432 mm) wide by 22 inches (559 mm) high.
-
11B-502.6.3 Location
A parking space identification sign shall be visible from each parking space....
-
11B-502.6.3 Location
A parking space identification sign shall be visible from each parking space....
-
11B-502.6.3 Location
A parking space identification sign shall be visible from each parking space....
-
Identification [§216.5, §502.6]
Identification [§216.5, §502.6] Accessible spaces must be identified by signs with the International Symbol of Accessibility (ISA) (§703.7.2.1)....
-
AUTOMATIC TELLER MACHINE (ATM)
[DSA-AC] Any electronic information processing device that accepts or dispenses cash in connection with a credit, deposit or convenience account....
-
AUTOMATIC TELLER MACHINE (ATM)
[DSA-AC] Any electronic information processing device that accepts or dispenses cash in connection with a credit, deposit or convenience account....
-
1.1.8 Alternate measurement tools
If the F - number system is used pedestrian paths should have a minimum FF of 25. Running slope should be measured along the same lines of measurements as given in Section 1.1.3....
-
Problem Four
Problem Four: No sign with the International Symbol of Accessibility is installed at each accessible parking space. Solution: Provide a temporary sign in front of each accessible...
-
220 Automatic Teller Machines and Fare Machines
220 Automatic Teller Machines and Fare Machines...
-
Q: In areas without 9-1-1 services, are PSAPs still required to provide access for TTY users to the telephone emergency services?
Where 9-1-1 is not available and a PSAP provides emergency services via a seven-digit number, it still must provide direct, equal access to TTY callers....
-
403.1 General
Where provided, biometrics shall not be the only means for user identification or control....
-
403.1 General
Biometrics shall not be the only means for user identification or control....