Except as otherwise provided in §§8.21(c)(1), 8.24(a), 8.25, and 8.31, no qualified individual with handicaps shall, because a recipient's facilities are inaccessible to or unusable...
Search Results "Pedestrian Access Point"
-
§8.20 General requirement concerning program accessibility.
-
Detail View – Accessible Theater Set-Up
Remove chairs to create spaces within rows for people using mobility devices (wheelchairs, scooters, crutches, braces, or other assistive mobility devices). It is not appropriate to...
-
Detail View – Accessible Round Set-Up
Measure from the back of one chair to the back of the chair directly behind it. Chairs must be set with the front edge of the chair at the edge of the table. In other words, the...
-
B. Restoration of TTY-Related Accessibility Requirements
[See subsections ...]
-
SECTION 1131A CHANGES IN LEVEL ON ACCESSIBLE ROUTES
[See subsections ...]
-
SECTION 1131A CHANGES IN LEVEL ON ACCESSIBLE ROUTES
[See subsections ...]
-
Error/Omission: The door to the toilet room swings into the required clear floor space at accessible fixtures, controls, and dispensers.
The accessible fixtures and controls required in 4.22.4, 4.22.5, 4.22.6, 4.22.7 and 4.23.4, 4.23.5, 4.23.6, and 4.23.7 shall be on an accessible route....
-
DEPARTMENT OF TRANSPORTATION DISABILITY LAW GUIDANCE: Origin-to-Destination Service
of origin to their point of destination....
-
§382.91(b)
passenger with a disability, or offered by carrier or airport operator personnel and accepted by a passenger with a disability, in moving from the terminal entrance (or a vehicle drop-off point...
-
Foot-candle
The illumination on a surface one square foot in area on which there is a uniformly distributed flux of one lumen, or the illuminance produced on a surface all points of which are at a distance...
-
§27.5 Special service system
Special service is characterized by the use of vehicles smaller than a standard transit bus which are usable by persons with a disability, demand-responsive service, point of origin to point...
-
Transits and construction lasers
Transits and construction lasers are useful for setting or measuring overall elevation points to determine a total slope....
-
R211.1 General
Where audible sign systems and other technologies are used to provide information equivalent to the information contained on pedestrian signs and transit signs, the signs are not required...
-
Dispersion
Dispersion Accessible boat slips must be dispersed throughout the various types of slips a facility provides, but a facility does not have to provide more accessible boat slips than required...
-
11B-903.4 Back support
Back support shall be 48 inches (1219 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (457 mm) minimum above the seat...
-
11B-903.4 Back support
Back support shall be 48 inches (1219 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (457 mm) minimum above the seat...
-
Transfer Supports (M301.3.1, M302.3.1, and M305.2)
M305.2.2 would require the transfer supports and their connections to be capable of resisting vertical and horizontal forces of 250 pounds applied to all points of the transfer support....
-
B.
providing fixed route bus service that people with disabilities can use to move among stops on the system, providing complementary paratransit service that gets eligible riders from their point...
-
Inpro Corporation JointMaster® DR Series Seal Expansion Joint Systems
Features & Benefits: Heavy pedestrian / Heavy vehicular loading capabilities Appropriate for horizontal applications Comprised of Neoprene Rubber: Superior movement...
-
15.1 Q. If a covered multifamily dwelling has public telephones in the lobby, what are the requirements for accessibility for these telephones?
While the chart does not address the quantity of accessible public telephones, at a minimum, at least one accessible telephone per bank of telephones would be required....
-
11B-104.1.1 Construction and manufacturing tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
-
11B-104.1.1 Construction and manufacturing tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
-
6. Where multiple swings in a swing bay are provided, Section 240.2.1.1 (one of each type) requires one swing to be located on an accessible route. If an accessible route is provided to more than one swing, can each swing be counted as an accessible ground level play component? If one is an infant seat and another a sling seat, are those considered two different types?
Where multiple swings in a swing bay are provided, Section 240.2.1.1 (one of each type) requires one swing to be located on an accessible route....
-
Cybex Total Access Upright Bike Plan
Requires the Premium User plan or above. (Login or upgrade your account!)
