This performance standard will apply at stations where construction or alteration of platforms begins 135 days or more after the rule is published....
Search Results "Applicable Standard"
Filters
Commonly Searched Documents
-
Section 37.42 Service in an integrated setting to passengers at intercity, commuter, and high-speed rail station platforms constructed or altered after February 1, 2012
-
Bosch 3-Point Self-Leveling Alignment Laser GPL 3
There's no waiting for a standard plumb bob to stop moving thanks to a quick-settling pendulum....
-
Hafele America Co. Pocket Door Hardware
straightforward installation and is suitable for sliding doors in residential settings (such as dining area/living area dividers, master bedroom/bath, and entryways from kitchens) and commercial applications...
-
Willoughby Industries WWF-5406/5408 AquaFount® Six and Eight Station Full Round 54" Solid Surface Deep Bowl Washfountain
ADA, TAS, and ANSI Compliant: At the standard 34" adult rim height, all stations are designed to comply with applicable ADA, TAS, and ANSI Z124.3 and Z124.6 accessibility guidelines....
-
Actions to Be Taken by LCG
LCG shall evaluate each request for reasonable modification on an individualized basis, based on objective evidence and current medical standards, and in a manner consistent with the terms...
-
11B-606.2 Clear floor space
[2010 ADA Standards] 2....
-
11B-410.1 General
Building owners are reminded that the ASME A18 Safety Standard for Platform Lifts and Stairway Chairlifts requires routine maintenance and inspections....
-
11B-704.3 Volume control telephones
[2010 ADA Standards] 704.3 Volume Control Telephones....
-
11B-221.2.3 Lines of sight and dispersion
[2010 ADA Standards] 221.2.3 Lines of Sight and Dispersion. Wheelchair spaces shall provide lines of sight complying with 802.2 and shall comply with 221.2.3....
-
Kristi Avalos
Accessology stays up-to-date on laws and standards and monitors litigation and Department of Justice (DOJ) action so you don't have to....
-
Face® Dipstick® Floor Profiler (Measuring F-Numbers - Concrete Flatness & Levelness Measurement)
Answer™ – just as fast as any other profiler when they are used according to their instructions; and the profiler that measures the most flatness/levelness indices, using the most extensive standard...
-
Easterseals Hawaii
Integrity We hold the Easterseals Hawaii ohana accountable to the highest standards of performance and behavior....
-
Allegion LCN 3130 Series Overhead Concealed Door Control
Features and Benefits UL and cUL listed without hold-open for self-closing doors Tested and certified under ANSI Standard A156.4, grade one Specifications...
-
M301.4.1 Clearance in Base (Section-by-Section Analysis)
These three commenters also raised concerns that this provision was in conflict with the prevailing standard used by manufacturers for medical beds and stretchers, IEC 60601-2-52, which...
-
Equipment and furniture.
The 2004 ADAAG includes revised requirements for some types of fixed equipment that are specifically addressed in the 1991 Standards, such as ATMs and vending machines, as well as detailed...
-
Title II Public Entity Facilities Compliance Fact Sheet
Alterations: Alterations to facilities of a public entity must also meet the "readily accessible" standard, to the maximum extent feasible....
-
T603 Wheelchair Securement Systems
These recommendations related to: potential incorporation of forthcoming standards on wheelchair tiedown and occupant restraint systems used in motor vehicles (SAE Recommended Practice J2249...
-
a. Transfer Surface Adjustability
The Access Board sought public comment in the MDE NPRM preamble on whether the final standards should require the height of the transfer surface to be adjustable from 17 inches minimum to...
-
RECOMMENDED CHANGE
ANSI/AAMI ES60601-1:2005, which is the safety standard most commonly used by medical devices, requires a similar instability test in section 9.4.2.3: ME EQUIPMENT having a mass of 25...
-
Picnic Tables [1011.2 and 1011.4]
The wheelchair space must be positioned for a forward approach and provide knee and toe clearance under the table that complies with section 306 of the ABA Standards....
-
Relationship to Other Laws
Except as otherwise provided in this part, this part shall not be construed to apply a lesser standard than the standards applied under title V of the Rehabilitation Act of 1973, 29 U.S.C...
-
Resources
Retrieved from http://www.ada.gov/lodblind.htm Guidance on the 2010 Standards for Accessible Design 2010 Standards for Accessible Design Title III Technical Assistance...
-
407.12 Reach Height (Section-by-Section Analysis)
Proposed 407.12 parallels existing 508 Standards § 1194.25(j), which applies side reach requirements to ICT that is “freestanding, non-portable, and intended to be used in one location.”...
-
Cost Estimates for Barrier Removal
for Barrier Removal Click here to view/download the pdf version (10 KB) Staff at Evan Terry Associates and a Birmingham general contractor developed the original estimates for the Standard...
