The bottom of diagonal curb ramps shall have 48 in (1220 mm) minimum clear space as shown in Fig. 15(c) and (d)....
Search Results "Parking Space Length"
-
4.7.10 DIAGONAL CURB RAMPS
-
Common Problems with Toilet Rooms
Ø The maneuvering space at the "accessible" toilet is too narrow. Ø The sink counter is too high, or there is insufficient knee clearance. ...
-
Areas of Rescue Assistance [4.1.3(9), 4.3.11]
Areas of rescue assistance are fire-rated spaces where people unable to use stairs can await evacuation assistance from emergency personnel....
-
TABLE OF CONTENTS
buildings and facilities 11B-203 General exceptions 11B-204 Protruding objects 11B-205 Operable parts 11B-206 Accessible routes 11B-207 Accessible means of egress 11B-208 Parking...
-
11B-604.8.1.2 Doors
Doors shall not swing into the clear floor space or clearance required for any fixture....
-
11B-604.8.1.2 Doors
Doors shall not swing into the clear floor space or clearance required for any fixture....
-
Existing Site Constraints: ADA Standard Section 206.7.5
Section 206.5.1 covers scoping requirements in the most current ADA Standards for the use of platform lifts due to existing site constraints.
-
11B-1005.3 Edge protection
12 inches (305 mm) where the 34 inch (865 mm) high railing is provided is an alternative design, permitting individuals using wheelchairs or other mobility devices to pull into a clear space...
-
11B-1005.3 Edge protection
12 inches (305 mm) where the 34 inch (865 mm) high railing is provided is an alternative design, permitting individuals using wheelchairs or other mobility devices to pull into a clear space...
-
§382.57(c)(7)(i) Visibility
The display screen must be visible from a point located 40 inches (1015 mm) above the center of the clear floor space in front of the automated kiosk....
-
Trailhead
An outdoor space that is designated by an entity responsible for administering or maintaining a trail to serve as an access point to the trail. ...
-
404.2.6 Doors in Series and Gates in Series
The distance between two hinged or pivoted doors in series and gates in series shall be 48 inches (1220 mm) minimum plus the width of doors or gates swinging into the space....
-
R304.5.1 Width
The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 1.2 m (4.0 ft) minimum....
-
R405.2.1 General
Space under an element between the finish surface and 230 mm (9 in) above the finish surface shall be considered toe clearance and shall comply with R405.2....
-
Chapter R3: Technical Requirements (Section-by-Section Analysis)
Chapter R3: Technical Requirements (Section-by-Section Analysis) Technical requirements specify what design criteria elements, spaces, and facilities must comply with in order to be considered...
-
§27.71(k)(7)(i) Visibility.
The display screen must be visible from a point located 40 inches (1015 mm) above the center of the clear floor space in front of the automated kiosk....
-
11B-404.2.9 Door and gate opening force
Repeals current Exception 1 for spaces not required to be accessible by general exceptions in Section 11B-203....
-
§ 382.57(c)(7)(i) Visibility
The display screen must be visible from a point located 40 inches (1015 mm) above the center of the clear floor space in front of the automated kiosk....
-
§ 27.71(k)(7)(i) Visibility
The display screen must be visible from a point located 40 inches (1015 mm) above the center of the clear floor space in front of the automated kiosk....
-
Section 2. Public use areas
"Public use areas" means interior or exterior rooms or spaces of a building that are made available to the general public....
-
EMPLOYEE WORK AREA
All or any portion of a space used only by employees and only for work. Corridors, toilet rooms, kitchenettes and break rooms are not employee work areas....
-
305.7 Maneuvering Clearance
Where a clear floor or ground space is located in an alcove or otherwise confined on all or part of three sides, additional maneuvering clearance shall be provided in accordance with 305.7.1...
-
4.1.6(1)(f)
(f) No new accessibility alterations will be required of existing elements or spaces previously constructed or altered in compliance with earlier standards issued pursuant to the Architectural...
-
§100.201 Public use areas
Public use areas means interior or exterior rooms or spaces of a building that are made available to the general public....