Wheelchair spaces shall provide a clear width of 30 inches (762 mm) minimum and a clear length of 48 inches (1219 mm) minimum measured to 9 inches (229 mm) minimum above the floor...
Search Results "Transfer Seat (Amusement)"
-
11B-1002.4.4.1 Width and length
-
11B-1002.4.4 Clearances
Clearances for wheelchair spaces shall comply with Section 11B-1002.4.4. Exceptions: Where provided, securement devices shall be permitted to overlap required...
-
11B-216.12 Amusement rides
[2010 ADAS] Advisory 216.12 Amusement Rides. ...
-
11B-216.12 Amusement rides
Advisory 11B-216.12 Amusement rides....
- Figure 610.3 Extent of Seat – Drawing from the U.S. Access Board
-
3.13(c) Companion Seating
Companion Seating At least one fixed companion seat shall be provided adjacent to each wheelchair space....
- American Specialties Folding Tub Seat 8358
- Irwin Seating Company ADA Swing-Away Aisle Panels
-
Additional Technical Criteria Considered for Transfer Supports
As discussed below, the Access Board is considering whether additional technical criteria would be appropriate for transfer supports....
-
5.1.2 Transfer Surface High Height Recommendations for M301 and M302
Therefore, transfer surfaces that are adjustable to a 25 inches maximum during patient transfer accommodate most patients who use mobility devices....
-
610.3.2 L-Shaped Seats
610.3.2 L-Shaped Seats....
-
I. Toilet Seat
Is the toilet seat at each accessible toilet between 17"-19" above the floor? [ADA Stds. 4.16.3] Yes __ No __ N/A __ Comments: ___________________________________________...
-
Companion Seats
Section 221.3 covers companion seats which are to be paired with wheelchair spaces....
-
6. Toilet Seat
Is the toilet seat in each accessible toilet room between 17"-19" above the floor? [ADA Stds. 4.16.3] Yes __ No __ N/A __ Comments: _____________________________________...
-
Team Player Seating Areas
Team Player Seating Areas Where provided, fixed team or player seating areas must contain the number of wheelchair spaces and companion seats required by ADAAG (based on the number of...
-
5.1.4 Transfer Surface Height Measurement
5.1.4 Transfer Surface Height Measurement....
-
(5) Bricks and Mortar Transfers
(5) Bricks and Mortar Transfers: A transfer of interest in the Brand Hotel in which, after completion of the transaction, the pre-transfer hotel owner retains management control of hotel...
-
5.1.1 Transfer Surface Height Adjustability Recommendation for M301 and M302
For some, independent transfers are only possible when there is minimal or no change in vertical height between the seat of the mobility device and the transfer surface....
-
Lawn Seating
Section 221.5 provides a new requirement that addresses lawn seating and exterior overflow areas. Such areas are required to be connected by an accessible route....
-
4.20.3 Seat
An in-tub seat or a seat at the head end of the tub shall be provided as shown in Fig. 33 and 34. The structural strength of seats and their attachments shall comply with 4.26.3....
-
4.20.3 SEAT
An in-tub seat or a seat at the head end of the tub shall be provided as shown in Fig. 33 and 34. The structural strength of seats and their attachments shall comply with 4.26.3....
- Access-Able Designs Tub Transfer Bench SH-414-2SDL
-
610.3.2 L-Shaped Seats
The rear edge of an L-shaped seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
-
Companion Seats
Section 802.3 addresses companion seats, which are required to be paired with wheelchair spaces (221.3)....