Edges shall be eased or rounded at 1/16 inch (1.59 mm) minimum, or chamfered at 1/8 inch (3.2 mm) maximum. Vertices shall be radiused between 1/8 inch (3.2 mm) minimum and ¼ inch...
Search Results "Toilet Room Signage"
-
11B-703.7.2.6.4 Edges and vertices on geometric symbols
-
11B-703.7.2.6.4 Edges and vertices on geometric symbols
Edges shall be eased or rounded at 1/16 inch (1.59 mm) minimum, or chamfered at 1/8 inch (3.2 mm) maximum. Vertices shall be radiused between 1/8 inch (3.2 mm) minimum and ¼ inch...
-
Saunas and Steam Rooms: ADA Standard Section 241
Section 241 covers scoping requirements in the current ADA Standards for saunas and steam rooms.
-
213.1 General
Where toilet facilities and bathing facilities are provided, they shall comply with 213....
-
11B-202 Existing buildings and facilities
Toilet and bathing facilities are regulated in Section 11B-213 and include toilet rooms and bathing rooms....
-
1009.9 Signage
Signage indicating special accessibility provisions shall be provided as shown: Each door providing access to an area of refuge from an adjacent floor area shall be identified by a...
-
1009.9 Signage
Signage indicating special accessibility provisions shall be provided as shown: Each door providing access to an area of refuge from an adjacent floor area shall be identified by a...
-
213.1 General
Where toilet facilities and bathing facilities are provided, they shall comply with 213....
-
11B-213.1 General
Where toilet facilities and bathing facilities are provided, they shall comply with Section 11B-213....
-
11B-213.1 General
Where toilet facilities and bathing facilities are provided, they shall comply with Section 11B-213....
-
11B-213.1 General
Where toilet facilities and bathing facilities are provided, they shall comply with Section 11B-213....
-
11B-502.6.4 Marking
Each accessible car and van space shall have surface identification complying with either Section 11B-502.6.4.1 or 11B-502.6.4.2.
-
11B-502.6.2 Minimum fine
Additional language or an additional sign below the International Symbol of Accessibility shall state “Minimum Fine $250.”
-
11B-502.6.4 Marking
Each accessible car and van space shall have surface identification complying with either Section 11B-502.6.4.1 or 11B-502.6.4.2.
-
11B-502.6.2 Minimum fine
Additional language or an additional sign below the International Symbol of Accessibility shall state “Minimum Fine $250.”
-
11B-216.3 Directional and informational signs
Signs providing direction to rooms or spaces include those that identify egress routes. ◼ ETA Editor's Note The ADA requirements and Advisory included at Section 11B-216.3 are...
-
11B-216.3 Directional and informational signs
Signs providing direction to rooms or spaces include those that identify egress routes. ◼ ETA Editor's Note The ADA requirements and Advisory included at Section 11B-216.3 are...
-
IV. Priority Seating Signs and Other Signage
Priority Seating Signs and Other Signage...
-
Error/Omission: The door to the toilet room swings into the required clear floor space at accessible fixtures, controls, and dispensers.
Error/Omission: The door to the toilet room swings into the required clear floor space at accessible fixtures, controls, and dispensers....
-
11B-604.8 Toilet compartments
Wheelchair accessible toilet compartments shall meet the requirements of Sections 11B-604.8.1 and 11B-604.8.3....
-
11B-604.8 Toilet compartments
Wheelchair accessible toilet compartments shall meet the requirements of Sections 11B-604.8.1 and 11B-604.8.3....
-
General: ADA Standard Section 803.1
Dressing, fitting, and locker rooms shall comply with 803. Advisory 803.1 General....
-
11B-803.1 General
Dressing, fitting, and locker rooms shall comply with Section 11B-803. Advisory 11B-803.1 General....
-
11B-803.1 General
Dressing, fitting, and locker rooms shall comply with Section 11B-803. Advisory 11B-803.1 General....