Signs shall comply with Section 11B-703. Where both visual and tactile characters are required, either one sign with both visual and tactile characters, or two separate signs, one...
Search Results "Raised Crossing"
-
11B-703.1 General
-
11B-216.4.1 Exit doors
Signs required by Chapter 10, Section 1013.4 at doors to exit passageways, exit discharge, and exit stairways shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and...
- Seton Custom SetonGlo™ Floor & Stair Identification Signs AV0154
-
Exterior Routes
303.4 Abrupt changes in level exceeding 4 inches, vertical dimension shall be identified by warning curb. 11B-303.5 Running and cross...
-
Exterior Routes
303.4 Abrupt changes in level exceeding 4 inches, vertical dimension shall be identified by warning curb. 11B-303.5 Running and cross...
-
Step 2: Identify the Presence of Limiting Factors
Does the combined trail running slope (grade) and cross slope exceed 1:2.5 (40 percent) for a continuous distance of 20 feet (6 meters) or more?...
- Where to Measure Along the Route
-
THE UNITED STATES OF AMERICA’S STATEMENT OF INTEREST ON THE PARTIES’ MOTIONS FOR SUMMARY JUDGMENT
The steps make the raised porches inaccessible and unnecessarily relegate individuals who use wheelchairs to separate entrances. Order 12, Aug. 31, 2011, ECF No. 109. ...
- Figure 407.2.3.1 Floor Designations on Jambs of Elevator Hoistway Entrances – Drawing from the U.S. Access Board
-
Which transition type do users with disabilities prefer?
When a sidewalk slopes more than 2% in the direction of travel and a walk with a maximum 2% cross slope intersects it, which transition segment type provides the safest usability for the...
- Methods for Placing a Slope Tool on the Surface
-
Inputs
Inputs The Department sought public comment on whether there was a need to revise the proposed requirement for tactilely discernible input controls to allow for accessible touch...
-
Figure 11B-407.2.3.1 Floor designation
SECTION TITLE NOTES Figure 11B-407.2.3.1 Floor designation. Revises the braille...
-
Can curbs be used to indicate areas with less than 80” of vertical clearance?
The standards specify a maximum height (27”) for the leading edge of barriers so they are within cane sweep, but a minimum height is not specified. Curbs may be mistaken for a step...
-
F206.2.5 Restaurants and Cafeterias
In restaurants and cafeterias, an accessible route shall be provided to all dining areas, including raised or sunken dining areas, and outdoor dining areas....
-
4.10.12(2)
Raised and Braille characters and symbols shall comply with 4.30....
-
206.2.5 Restaurants and Cafeterias
In restaurants and cafeterias, an accessible route shall be provided to all dining areas, including raised or sunken dining areas, and outdoor dining areas. EXCEPTIONS: 1....
-
Issue 1: APS volume
Directional guidance from audible pedestrian signals for street crossing. Ergonomics. 2004. Vol. 47, (12), 1318 – 1338. 10. Carroll & Bentzen. p. 14. 11....
-
11B-705.1.1.3 Color and Contrast
Detectable warning surfaces at transit boarding platform edges, bus stops, hazardous vehicular areas, reflecting pools, and track crossings shall comply with Section 11B-705.1.1.3.1....
- ADA Sign Depot Stairwell Floor Level Sign with Tactile Text and Grade 2 Braille - 12" x 12"
-
406.6 Diagonal Curb Ramps
Diagonal curb ramps provided at marked crossings shall provide the 48 inches (1220 mm) minimum clear space within the markings....
-
11B-206.2.5 Restaurants, cafeterias, banquet facilities and bars
In restaurants, cafeterias, banquet facilities, bars, and similar facilities, an accessible route shall be provided to all functional areas, including raised or sunken areas, and outdoor...
-
11B-206.2.5 Restaurants, cafeterias, banquet facilities and bars
In restaurants, cafeterias, banquet facilities, bars, and similar facilities, an accessible route shall be provided to all functional areas, including raised or sunken areas, and outdoor...
