However, the public accommodation must ensure that its safety requirements are based on real risks, not on speculation, stereotypes, or generalizations about individuals with disabilities...
Search Results "Military Base"
Filters
Commonly Searched Documents
-
III-4.1200 Safety
-
1. Public Participation and Request for Comments
The Access Board will consider all the comments and may change the proposed standards based on the comments....
-
§ 37.139(i)
(i) A request for a waiver based on undue financial burden, if applicable....
-
§ 38.125(c)(1) Design load
or longer shall support a load of 600 pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26 inches by 26 inches, with a safety factor of at least 3 based...
-
§ 38.95(c)(1) Design load
or longer shall support a load of 600 pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26 inches by 26 inches, with a safety factor of at least 3 based...
-
11B-703.2.5 Character height
Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
-
Hager Companies Door Pull 974B
Door Pull Pull Material:- Brass, bronze, stainless steel Base Material:- Black anodized aluminum ...
-
1009.5.2 Transfer Space
A transfer space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer platform surface and shall...
-
804.2.1 Pass Through Kitchen
through kitchens where counters, appliances or cabinets are on two opposing sides, or where counters, appliances or cabinets are opposite a parallel wall, clearance between all opposing base...
-
804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
Are charging parties protected from retaliation?
Even if an individual has already filed a charge of discrimination, s/he can file a new charge based on retaliation....
-
219 Assistive Listening Systems
Section 219.3 specifies the minimum number of receivers according to a sliding scale based on the seating capacity of the assembly area....
-
1009.4.1 Clear Deck Space
A clear deck space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer wall....
-
804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
Water Hydrants
The surface at the base of water hydrants at recreation areas must be firm and stable with a 60-inch turning radius. See the "Surfaces" rule of thumb above....
-
§ 36.208(b)
(b) In determining whether an individual poses a direct threat to the health or safety of others, a public accommodation must make an individualized assessment, based on reasonable judgment...
-
§ 36.303(d)(1)
real-time communication with individuals using auxiliary aids and services, including text telephones (TTYs) and all forms of FCC-approved telecommunications relay systems, including Internet-based...
-
Exits
Exits Scoping for entrances is based in part on the number of exits required by the applicable building or life safety code....
-
§100.500 Discriminatory effect prohibited.
[78 FR 11482, Feb. 15, 2013] Liability may be established under the Fair Housing Act based on a practice's discriminatory effect, as defined in paragraph (a) of this section, even if...
-
4. Changes Made to the Proposed Rule
The proposed rule was based on the report of a regulatory negotiation committee. We released a draft of the final rule in 2009....
-
2.3.2
The acceptable tools should be selected based on the accuracy required and a reasonable balance between the accuracy of the tool and the time, cost, and experience required for measurement...
-
Original research for ANSI A117.1 (1957 - 1961)
A117.1 - 1961, American National Standard Specifications for Making Buildings and Facilities Accessible to, and Usable by, the Physically Handicapped, ramps were assessed for flatness based...
-
§ 35.139(b)
(b) In determining whether an individual poses a direct threat to the health or safety of others, a public entity must make an individualized assessment, based on reasonable judgment that...
-
§ 35.161(b)
provide effective real-time communication with individuals using auxiliary aids and services, including TTYs and all forms of FCC-approved telecommunications relay system, including Internet-based...
