The size of transfer surfaces shall be measured from center points of their opposing sides....
Search Results "IDeA Center"
-
M301.2.3 Size
-
Parking Spaces
Parking Spaces Measure from the center of marking lines. If lines are not adjacent to another space or aisle the measurement can be to the full width of the line....
-
Appendix 4 – References
Buffalo, NY: Center for Inclusive Design and Environmental Access. Paquet, V., Feathers, D. (2004). An anthropometric study of manual and powered wheelchair users. ...
-
11B-411.2.1.7.2 Assignment by touch screen hall call console
The size of the keypad shall be a nominal 4 inches (102 mm) wide by 5 inches (127 mm) high in a 12-key ascending telephone keypad layout centered in the console....
-
11B-411.2.1.7.2 Assignment by touch screen hall call console
The size of the keypad shall be a nominal 4 inches (102 mm) wide by 5 inches (127 mm) high in a 12-key ascending telephone keypad layout centered in the console....
-
Display Screens
Comments: The Trace Center suggested that we change the requirement for display screens such that they must not only be visible, but also readable, from a point located 40 inches (1015 mm...
-
707.7.1 Visibility
The display screen shall be visible from a point located 40 inches (1015 mm) above the center of the clear floor space in front of the machine....
-
11B-707.7.1 Visibility
The display screen shall be visible from a point located 40 inches (1016 mm) above the center of the clear floor space in front of the machine....
-
Assistive listening devices
Contact the USDA TARGET Center at (202) 720-2600 (voice/TTY) for advice on models....
-
707.7.1 Visibility
The display screen shall be visible from a point located 40 inches (1015 mm) above the center of the clear floor space in front of the machine....
-
11B-707.7.1 Visibility
The display screen shall be visible from a point located 40 inches (1016 mm) above the center of the clear floor space in front of the machine....
-
PLACE OF PUBLIC ACCOMMODATION
other establishment serving food or drink; (3) A motion picture house, theater, concert hall, stadium, or other place of exhibition or entertainment; (4) An auditorium, convention center...
-
National Resource Center on ADHD
by Cooperative Agreement 1U84DD001049-01 with the National Center on Birth Defects and Developmental Disabilities (NCBDD) at the CDC....
-
603.1 General (Section-by-Section Analysis)
603.1 General (Section-by-Section Analysis) This section addresses the accessibility of ICT support services, such as help desks, call centers, training centers, and automated self-service...
-
232.1 General
Detention facilities include, but are not limited to, jails, detention centers, and holding cells in police stations....
-
11B-608.2.2 Standard roll-in type shower compartments
Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
Contrast Correlates to Visual Acuity
and you’re forced to use your peripheral vision to do everything you used to do with your central vision – everybody’s contrast sensitivity is worse in the periphery than it is in the center...
-
11B-608.2.2 Standard roll-in type shower compartments
Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
Regulations about Ticket Sales
I attended the "Accessibility Trends in Museums and Performing Arts Venues" session at the National ADA Symposium in May, with expert Betty Siegel of the Kennedy Center for the Performing...
-
Executive Summary
at the IDeA Center, University at Buffalo, SUNY, to obtain the needed information in 2000....
-
Section 6.0 Conclusions
Some are already participating in other research at the IDeA Center....
-
ADA INFORMATION RESOURCES
National Network of ADA Centers Ten regional centers are funded by the U.S....
-
603.1 General
ICT support services including, but not limited to, help desks, call centers, training services, and automated self-service technical support, shall conform to 603....
