Product Features Fabricated of #22 gauge stainless steel with a #4 satin finish Concealed in-wall mounting Holds 600 c-fold or 800 multifold towels Product Specs Cabinet:...
Search Results "Head End Wall"
- AJW Architectural Products U280 C-fold/Multifold Towel Dispenser - In-Wall Recessed
- Ampetronic CLS2 Wall Mount Perimeter Induction Loop Driver Hearing System
-
Can surface decals substitute for post- or wall-mounted signs?
No, the Standards require signs identifying accessible parking spaces that are at least 60” high measured to the bottom edge of the sign so that they are visible when a vehicle is...
-
Clear Floor Space [4.20.2]
ADAAG allows a lavatory on the same plumbing wall to overlap the clear floor space at the tub because knee and toe clearance is available below an accessible lavatory....
- Just Manufacturing Wall Mounted Sink Faucet with Pail Hook and Vacuum Breaker
- Neo-Metro Ebb Concept - Wall Mounted Cast Resin Deck Featuring Ebb Basin
-
609.3 Spacing
The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm) minimum....
- Neo-Metro Commercial Wall Mounted Neo-Basin 8935 Series
-
Clear floor space
It appears that a minimum 6'-6" rear wall would be required if bench is parallel to a wall?...
-
Protruding Objects
The undersides of stairs in any route must be enclosed or protected with a cane-detectable barrier, so that people who are blind or have vision loss will not hit their heads on the underside...
- Mega Jailhouse Anti-Ligature Toilet Paper Holder With Concealed Mount Behind Wall Access Required
- Willoughby Industries ETW-1445-BS-HC Toilet for 45-degree Chase Wall
-
11B-608.3.2 Standard roll-in type shower compartments
Grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat....
-
11B-608.3.2 Standard roll-in type shower compartments
Grab bars shall be provided on the back wall and the side wall opposite the seat. Grab bars shall not be provided above the seat....
-
11B-604.8.1.5 Grab bars
A side-wall grab bar complying with Section 11B-604.5.1 shall be provided and shall be located on the wall closest to the water closet....
-
11B-604.8.1.5 Grab bars
A side-wall grab bar complying with Section 11B-604.5.1 shall be provided and shall be located on the wall closest to the water closet....
-
Plan 4B: 13-Foot Wide Accessible Guest Room
section 806); • Alternate roll-in type shower with folding seat is 36 inches deep and 60 inches wide (section 608.2.3); • Alternate roll-in shower has a 36-inch wide entry at one end...
-
11B-610.3 Shower compartment seats
A seat in a standard roll-in shower compartment shall be a folding type, shall be installed on the side wall adjacent to the controls, and shall extend from the back wall to a point within...
-
11B-610.3 Shower compartment seats
A seat in a standard roll-in shower compartment shall be a folding type, shall be installed on the side wall adjacent to the controls, and shall extend from the back wall to a point within...
-
Transfer Type Shower Compartments: ADA Standard Section 608.3.1
Section 608.3.1 covers the current ADA Standards for grab bars in transfer type shower compartments.
-
11B-608.3.1 Transfer type shower compartments
In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (457 mm) from the control wall....
-
11B-608.3.1 Transfer type shower compartments
In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (457 mm) from the control wall....
-
Inpro Corporation ENDURANT® Partition Wall Panel
Requires the Premium User plan or above. (Login or upgrade your account!)
-
Kohler Elevance Rising Wall Alcove Bath Model
Requires the Premium User plan or above. (Login or upgrade your account!)