The WingIts® Reversible L Shaped 26" x 22.5" Shower Seat Benefits: ADA compliant - Exceeds all building codes for ADA and 2010 ASAAG and 2009 ANSI Standards Comfort and...
Search Results "Fixed Shower Head"
Filters
Commonly Searched Documents
-
Wingits Reversible L-shaped 26" x 22.5" Shower Seat
-
Inclusion Solutions Voting Booth Accessories Franklin Voting Chair
Usable for all voters including the elderly, voters with disabilities, special needs or poll workers. Meets all ADA, ADAAG and U.S. Department of Justice accessibility...
-
Kohler DTV Prompt Digital Shower Interface
The easy-to-use DTV Prompt digital shower system puts total control of your shower experience at your fingertips....
-
Bathroom Do’s and Dont’s
Provide a rubber shower mat as an option....
-
Spas
Spas Spas must provide at least one accessible means of entry, which can be a pool lift, transfer wall, or transfer system. If spas are provided in a cluster, 5 percent of the...
-
Clear Deck Space
Clear Deck Space Clear deck space must be provided to enable a person to get close enough to the pool lift seat to easily transfer from a wheelchair or mobility device. This clear...
-
Plan 5B: 13-Foot Wide Accessible Guest Room
Features include a transfer shower, comparable vanity, open clothes closet, and door connecting to adjacent guest room. Furnishings include two beds. ...
-
K3
In each eating area, if tables with fixed seats are provided, do at least 5% of each type of table with fixed seats have accessible locations with knee space at least 27 inches high, at...
-
F218.2 New and Altered Fixed Guideway Stations
New and altered stations in rapid rail, light rail, commuter rail, intercity rail, high speed rail, and other fixed guideway systems shall comply with 810.5 through 810.10....
-
218.2 New and Altered Fixed Guideway Stations
New and altered stations in rapid rail, light rail, commuter rail, intercity rail, high speed rail, and other fixed guideway systems shall comply with 810.5 through 810.10....
-
11B-809.10.6.5 Thresholds
Where provided thresholds shall be 2 inches (51 mm) maximum in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from the...
-
9.5.2(2)(c)
turning space complying with 4.2.3, one water closet complying with 4.16, one lavatory complying with 4.19 and the door shall have a privacy latch; and, if provided, at least one tub or shower...
-
Bobrick Shower Curtain B-204.3
70" W x 72" H (1780 x 1830mm), Opaque, matte white vinyl, .008" (0.2mm) thick, contains antibacterial and flame retardant agents. Nickel-plated brass grommets along top, one every 6"...
-
Bobrick Shower Curtain B-204.2
42" W x 72" H (1065 x 1830mm), Opaque, matte white vinyl, .008" (0.2mm) thick, contains antibacterial and flame retardant agents. Nickel-plated brass grommets along top, one every 6"...
-
Symmons Naru Tub/Shower Valve S-4100
With its clean and fresh individuality, this original Symmons tub and shower system is bold and simple....
-
11B-206.5.3 Transient lodging facilities
Exception: Shower and sauna doors in guest rooms that are not required to provide mobility features complying with Section 11B-806.2 shall not be required to comply with Section 11B-404.2.3...
-
T215.3. Public Address and Stop Request Systems
Large non-rail vehicles that operate in fixed route service with multiple designated stops shall provide public address and stop request systems in accordance with T215.3....
-
Speakman Versatile Shower Combination VS-2054
The VS-2054 is a shower combination which includes a hand-held shower with a 69 In. rubber lined steel hose, vacuum breaker, swivel connector and 30 In....
-
American Specialties Folding Shower Seat 8206-L
(Left Hand) Meets ADA Accessibility Guidelines and the needs of the physically disabled and elderly. Seat is 1/2" (13 mm) thick, one piece solid phenolic, ivory colored. Frame,...
-
Temporary and Permanent Structures: ADA Standard Section 201.3
Section 201.3 covers the application of the most current requirements for temporary and permanent structures.
-
Height: ADA Standard Section 902.4.2
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground.
-
Height: ADA Standard Section 902.3
The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground.
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground.
-
11B-201.3 Temporary and permanent structures
Temporary buildings or facilities covered by these requirements include, but are not limited to, reviewing stands, temporary classrooms, bleacher areas, stages, platforms and daises, fixed...
