totaling 135 lbs. each, with 67.5 lbs applied resistance Basic Specifications: Product Width: 77.50" (197 cm) Product Height: 92.50" (235 cm) Product Length: 43.75" (112 cm) Machine...
Search Results "Drive-Up Fare Machine"
Commonly Searched Documents
- Hoist HD-1900 Dual Pulley System
- Wheelchair Fitness Solutionâ„¢ Complete Fitness System
-
Side Reach [4.2.6]
Further guidance on reach heights according to depth is available from specifications for automated teller machines in ADAAG 4.34 (see page 125)....
-
Public Education
The Supervisor shall make a demonstration Edge machine available to the public several months prior to each Election at each of the Supervisor's Offices and by demonstrating it at least...
-
11B-503.5 Vertical clearance
Vehicle pull-up spaces, access aisles serving them, and a vehicular route from an entrance to the passenger loading zone and from the passenger loading zone to a vehicular exit shall provide...
-
11B-503.5 Vertical clearance
Vehicle pull-up spaces, access aisles serving them, and a vehicular route from an entrance to the passenger drop-off and loading zone and from the passenger drop-off and loading zone to...
-
11B-503.4 Floor and ground surfaces
Vehicle pull-up spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle pull-up space they serve....
-
4.34.3(2)(a) Reach Depth Not More Than 10 in
the operable parts of all controls as measured from the vertical plane perpendicular to the edge of the unobstructed clear floor space at the farthest protrusion of the automated teller machine...
- Figure 503.3 Passenger Loading Zone Access Aisle – Drawing from the U.S. Access Board
-
Laundry Room
Elevated water saving washer and elevated dryer with front-mounted controls Recycling bins and composter (eliminating the need for a garbage disposal) LED tread...
-
4.34.3(1) Forward Approach Only
(1) Forward Approach Only. If only a forward approach is possible, operable parts of all controls shall be placed within the forward reach range specified in 4.2.5.
-
Forward Approach
Forward Approach A maximum height of 48 inches is required for a forward reach. Clear floor space must be provided to the face of the unit since the seated forward reach does not...
- Gateway to Gold Mobile App for U.S. Paralympics
-
3.Guidelines for Compatibility With Peripheral Devices
accessibility, and should comply with the following provisions, as applicable: Hearing aid coupling Where a product delivers output by an audio transducer which is normally held up...
- SciFit Inclusive Fitness ISO7000R - Recumbent Bike
-
General: ADA Standard Section 205.1
Section 205.1 of the ADA Standards covers information on scoping requirements for operable parts in the most current ADA Standards.
- Cybex Total Access Arc Trainer
- Cybex Total Access Upright Bike
-
Section B: Passenger Drop-Off Area
Yes No N/A Comments/Remedies B1 Is the vehicle pull-up space on a level surface, with slopes not exceeding 1:48 in all directions?...