It shall be identified by a raised symbol and lettering complying with 4.30 and located adjacent to the device....
Search Results "Mobility Aid Seating Location"
Filters
Commonly Searched Documents
-
4.10.14* Emergency Communications
-
A4.1.3(10)
For example, in a large facility such as a convention center that has water fountains at several locations on a floor, the accessible water fountains should be located so that wheelchair...
-
Orienting Attendees to the Meeting Space
To help orient attendees with vision disabilities to the meeting location, it may be useful to provide some descriptive information....
-
11B-233.3.1.2.5 Multi-story residential dwelling units in buildings with no elevator
At least one powder room or bathroom shall be located on the primary entry level....
-
11B-810.6.2 Routes and destinations
Lists of stations, routes and destinations served by the station which are located on boarding areas, platforms, or mezzanines shall comply with Section 11B-703.5....
-
11B-608.6 Shower spray unit and water
One shower head shall be located at a height of 48 inches (1219 mm) maximum above the shower finish floor....
-
Epilepsy Foundation
We educate about proper seizure awareness, recognition and first aid. We advocate for improved rights and regulations involving people living with epilepsy....
-
Council of Citizens with Low Vision International (CCLVI)
CCLVI is an advocacy membership organization the purposes of which are: To establish the right of persons with low vision to make full use of their vision through all available aids...
-
‘‘Commercial facilities’’ (Preamble, Section-by-Section Analysis)
., those requirements concerning auxiliary aids and general nondiscrimination provisions)....
-
F105.2.3 ASTM
Surface materials that comply with this standard and are located in the use zone must also comply with ASTM F 1292....
-
105.2.3 ASTM
Surface materials that comply with this standard and are located in the use zone must also comply with ASTM F 1292....
-
105.2.3 ASTM
Surface materials that comply with this standard and are located in the use zone must also comply with ASTM F 1292....
-
Commercial Facilities (Section-By-Section Analysis and Response to Comments)
., those requirements concerning auxiliary aids and general nondiscrimination provisions)....
-
II-3.7200 Licensing
Where a public entity administers licensing examinations, it must provide auxiliary aids for applicants with disabilities and administer the examinations in accessible locations....
-
End Transfer Surface
A transfer surface located at one end of an examination surface that allows patient transfer at the end and one adjoining side of the examination surface....
-
§ 1194.3(f)
(f) Products located in spaces frequented only by service personnel for maintenance, repair, or occasional monitoring of equipment are not required to comply with this part....
-
703.6.1 Pictogram Field
Characters and braille shall not be located in the pictogram field....
-
11B-216.8.1 Geometric symbols
Provides Exceptions 1 and 2 for locations where geometric symbols are not required....
-
H20
Is the flush valve located on the wide side adjacent to the lavatory or is an automatic flush valve provided? [ADA Standards § 4.16.5] Yes No...
-
5a.
Are the elevator call buttons mounted in an accessible location with the centerlines at 42 inches above the floor? [ADA Stds 4.10.3] Yes _____ No _____...
-
703.6.1 Pictogram Field
Characters and braille shall not be located in the pictogram field....
-
4.34.6.5(2)
(2) Rough-in plumbing shall be located to accept connections of supply and drain pipes for sinks mounted at the height of 28 in (710 mm)....
-
FACILITY
[DSA-AC] All or any portion of buildings, structures, site improvements, elements, and pedestrian routes or vehicular ways located on a site....
-
FACILITY
[DSA-AC] All or any portion of buildings, structures, site improvements, elements, and pedestrian routes or vehicular ways located on a site....
