The seat shall be rigid and shall have a back support that is at least 12 inches (305 mm) tall....
Search Results "Construction Support Facility"
-
11B-1009.2.4 Seat
-
410.5 Digital Encoding of Speech (Section-by-Section Analysis)
systems would exempt such systems from conformance to ITU-T Recommendation G.722 provided that they conform to another standard that ensures equivalent or better acoustic performance and support...
-
4.1.3(19)(b)
For other assembly areas, a permanently installed assistive listening system, or an adequate number of electrical outlets or other supplementary wiring necessary to support a portable assistive...
-
2.2.1 Demographic Information
., power chair, scooter), and within each type: make, model, age, armrests, footrests, drive wheels, controller, seat support surfaces and overall condition of the seating surface....
-
FAQ: How do I speak to a live technical specialist?
The ADA National Network provides information, guidance and training on how to implement the Americans with Disabilities Act (ADA) in order to support the mission of the ADA to “assure equality...
-
Q. Does the ADA take safety issues into account?
However, an employer may not simply assume that a threat exists; the employer must establish through objective, medically supportable methods that there is genuine risk that substantial...
-
§ 38.23(c)(8) Handrails
The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure....
-
§ 38.95(c)(8) Handrails
The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure....
-
§ 38.83(c)(8) Handrails
The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure....
-
§ 38.125(c)(8) Handrails
The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure....
-
101.1.2
101.1.2 All new or altered public buildings and facilities, private buildings and facilities, places of public accommodation, and commercial facilities subject to this code shall comply...
-
Design of Shared Use Paths, Street Intersections, and Midblock Crossings
bring about a general awareness within the professional community of bicycle and pedestrian mode planners, they represent a small portion of the design professionals preparing designs and construction...
-
F230.1 General
Where a two-way communication system is provided to gain admittance to a building or facility or to restricted areas within a building or facility, the system shall comply with 708....
-
230.1 General
Where a two-way communication system is provided to gain admittance to a building or facility or to restricted areas within a building or facility, the system shall comply with 708....
-
F216.4.1 Exit Doors
An exit passageway is a horizontal exit component that is separated from the interior spaces of the building by fire-resistance-rated construction and that leads to the exit discharge or...
-
Cross Slope
Cross Slope The cross slopes of gangways, transition plates and floating piers that are part of an accessible route must be designed and constructed not to exceed a maximum of 2 percent...
-
216.4.1 Exit Doors
An exit passageway is a horizontal exit component that is separated from the interior spaces of the building by fire-resistance-rated construction and that leads to the exit discharge or...
-
7.2 General Exceptions
The basis for the determination that General Exception 1 or General Exception 2 apply shall be documented and maintained with the records of the construction or alteration project. ...
-
7.2.2 General Exception 2
For long-distance trails, this exception applies to the trail segments that are planned for construction or alteration in a given planning period, rather than over the entire length of the...
-
Thresholds [§404.2.5]
Thresholds [§404.2.5] The height of thresholds is limited to 1/2” in new construction. The edge must be beveled 1:2 maximum above a height of 1/4”....
-
5.2.1.4 Transfer Surface Size Recommendations for Imaging Equipment (M301)
To facilitate transfers and to mitigate this fall hazard, the Committee proposes the inclusion of transfer supports (M301.3)....
-
The ADA on the Eve of the 1988 Election
Many declared their support by becoming cosponsors of the bill. The disability community was also becoming much more optimistic at the close of 1988....
-
Lift Compatibility (M301.4 and M302.4)
For example, full body bone densitometers usually have components that move beneath the length of the patient support surface and may prevent the equipment from meeting the technical criteria...
-
Medical Device Manufacturers
Many medical device manufacturers currently incorporate accessible features in some of their products such as patient support surfaces that are height adjustable, transfer and positioning...