The addition or replacement of signs and/or identification devices shall be limited to the actual scope of work of the project and shall not be required to comply with Section 11B-202.4....
Search Results "Sign Clear Floor Space"
Filters
Commonly Searched Documents
-
Exception 6
-
1013.4, Item 1
Each grade-level exterior exit door that is required to comply with Section 1013.1 shall be identified by a tactile exit sign with the word, “EXIT.”...
-
IV.B.1.
Where destination or route information is displayed on the exterior of a vehicle, each vehicle shall have illuminated signs on the front and boarding side of the vehicle....
-
ATTACHMENT B
I have been advised that, before signing this release, I have the right to consult a private attorney regarding its contents. ...
-
Picnic Units
The minimum size of a picnic unit is determined by the required clear space around each feature and the type and number of provided constructed features Ensure all pedestrian routes that...
-
Harris Communications Inc. ADA Compliant Guest Room Kit 500A Hard Case
Sensor (GAD-DBEACON) Telephone Handset Amplifier (AMER-HA40) Telephone Signaler (SA-TR50) Alarm Clock (SA-SB200SS) Assistive Listening Devices available sign...
-
1010.1.7 Door arrangement
Space between two doors in a series shall be 48 inches (1219 mm) minimum plus the width of a door swinging into the space....
-
1117B.5.6
SECTION 1117B - OTHER BUILDING COMPONENTS 1117B.5 Signs and identification. ...
-
3. If I comply with the California accessibility requirements, am I in compliance with ADA?
Under the CBC, however, if you change the use of a room or space without submitting for a permit, the accessibility requirements of the CBC still applies....
-
1009.5.6 Size
Each transfer step shall have a tread clear depth of 14 inches (355 mm) minimum and 17 inches (430 mm) maximum and shall have a tread clear width of 24 inches (610 mm) minimum....
-
§ 37.189(e)
A tour bus operator requires all passengers to reserve space on the bus three months before the trip date....
-
11B.707.7.1.1 Vertically mounted display screen
mounted vertically or tipped away from the viewer less than 30 degrees, the center line of the display screen and other display devices shall be no more than 52 inches (1321 mm) above the floor...
-
Section 36.406(e) Housing at a Place of Education
There are other differences between the two sets of standards, including requirements for accessible windows, alterations, kitchens, an accessible route throughout a unit, and clear floor...
-
11B-606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (864 mm) maximum above the finish floor or ground....
-
Element-by-Element Safe Harbor
The 1991 Standards require one van accessible space for every eight accessible spaces. The 2010 Standards require one van accessible space for every six accessible spaces....
-
1009.5.1 Transfer Platform
Transfer platforms shall provide 19 inches (485 mm) minimum clear depth and 24 inches (610 mm) minimum clear width. Figure 1009.5.1 Size of Transfer Platform...
-
11B-1009.5.6 Size
Each transfer step shall have a tread clear depth of 14 inches (356 mm) minimum and 17 inches (432 mm) maximum and shall have a tread clear width of 24 inches (610 mm) minimum....
-
11B-904.6 Security glazing
Where assistive listening devices are installed, place signs complying with Section 11B-703.7.2.4 to identify those facilities which are so equipped....
-
Overview of Proposed Guidelines
Transit stops and transit shelters for buses and light rail vehicles, including requirements for boarding and alighting areas at sidewalk or street level, boarding platforms, and route signs...
-
General: ADA Standard Section 211.1
Section 211.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for drinking fountains.
-
Counter: ADA Standard Section 904.3.2
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
11B-203.13 Raised boxing or wrestling rings
An accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements...
-
11B-904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
11B-411.2.1.3.1 Keypad call console arrangement
The accessibility function button shall be located directly below the keypad at a height of 36 inches (914 mm) to 42 inches (1067 mm) above the finish floor....
