Although kick plates are not necessarily required by the code, they are often applied to areas of doors required to have a smooth surface and be free of abrupt surface changes....
Search Results "Supplemental Requirement"
-
KICK PLATE
-
11B-1002.4.4 Clearances
Where provided, securement devices shall be permitted to overlap required clearances. 2. Wheelchair spaces shall be permitted to be mechanically or manually repositioned. 3....
-
11B-216.8.1 Geometric symbols
Geometric symbols shall not be required at entrances to toilet and bathing rooms located within private or semi-private rooms or spaces....
-
11B-706.3 Receiver hearing-aid compatibility
Receivers required to be hearing-aid compatible shall interface with telecoils in hearing aids through the provision of neckloops....
-
11B-704.2.1 Clear floor or ground space
Because clear floor and ground space is required to be unobstructed, telephones, enclosures and related telephone book storage cannot encroach on the required clear floor or ground space...
-
11B-703.5 Visual characters
Exception: Where visual characters comply with Section 11B-703.2 _|Signs; Raised Characters|_ and are accompanied by Braille complying with Section 11B-703.3, they shall not be required...
-
11B-1005.1 Accessible routes
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9144 mm) minimum, gangways shall not be required to comply with Section...
-
907.5.2.3.3 Group R-2
In Group R-2 occupancies required by Section 907 to have a fire alarm system, all dwelling units and sleeping units shall be provided with the capability to support visible alarm notification...
-
Appendix to Part 38—Guidance Material
28, 1998; 79 FR 21407, Apr. 16, 2014] This appendix contains materials of an advisory nature and provides additional information that should help the reader to understand the minimum requirements...
-
11B-232.5.1 Cubicles and counters
Exception: The inmate or detainee side of cubicles or counters at non-contact visiting areas not serving holding cells or housing cells required to comply with Section 11B-232 shall not...
-
11B-206.4.8 Service entrances
ETA Editor's Note The ADA requirements included in Subsection 11B-206.4.8 are provided for information only. The CBC scoping requirements are more inclusive for alterations....
-
KICK PLATE
Although kick plates are not necessarily required by the code, they are often applied to areas of doors required to have a smooth surface and be free of abrupt surface changes....
-
M305.2.1 Location (Section-by-Section Analysis)
, and requiring the transfer support to be located on the side of the transfer surface opposite the transfer side....
-
Baseline
Requirements in Proposed Guidelines That Will Have More Than Minimal Impacts on State and Local Transportation Departments Requirement Governmental Units Affected...
-
Section 1193.39 Prohibited reduction of accessibility, usability and compatibility [1193.29 in the NPRM] (Section-by-Section Analysis)
Both of these prohibit alterations which reduce or have the effect of reducing accessibility below the requirements for new construction....
-
H. Repairing and Rebuilding
When constructing new or replacement facilities and repairing damaged facilities, state and local governments must comply with the accessibility requirements of Title II of the ADA....
-
Section 1193.33 Accessibility and usability
In addition, where manufacturers provide employee training, they are required to provide training appropriate to an employee's function, where readily achievable....
-
11B-202 Existing buildings and facilities
SECTION 11B-202 Existing buildings and facilities 11B-202.4 Path of travel requirements in alterations, additions and structural repairs Exceptions: 8....
-
233.1 General
Section 233 outlines the requirements for residential facilities subject to Texas Government Code, Chapter 469....
-
Maximum side reach ranges. (Section-by-Section Analysis)
Industry commenters asserted that requiring existing facilities to apply the new requirement would mean, among other things, that entities would be required to lower every light switch in...
-
PROGRAM OPTIONS
IDEA requires that each child with a disability participates with nondisabled children in these programs and activities to the maximum extent appropriate to the needs of that child.7 Physical...
-
T402 Ramps and Bridgeplates
These technical requirements are organized in similar fashion to the proposed rule; they also remain the same substantively as in the proposed rule, with the exception of the requirements...
-
410.2 Volume Gain (Section-by-Section Analysis)
410.2 Volume Gain (Section-by-Section Analysis) This section proposes to require ICT with two-way communication to provide volume gain conforming to the FCC’s current regulation at 47...
-
Gates and Barriers
That section requires 36 inches (915 millimeters) of clear width....