construction and renovations including: Schools and universities Healthcare facilities Government buildings Commercial and industrial Office and retail space...
Search Results "Electric Vehicle Charging Space"
Commonly Searched Documents
- Corbin Russwin Inc. ED7000 Series Narrow Stile Crossbar Exit Device
- Grohe Essence New Lavatory Centerset S-Size
- Aluminum Flush Top SGF Series Pressure-Locked Grating
- Tork Elevation® Xpress® Hand Towel Dispenser, White
- Magnuson Group DS Series Wall Coat Racks
- Aurora Doors Sliding Barn Door
- Inclinator VL Vertical Platform Lift
- Rockwood Manufacturing Company 35 Push & Pull Bar Set 3/8" x 1-1/4" Door Hardware
-
18. Where an existing ground level play component is replaced, should the new component comply with the technical provisions of Section 1008.4 even if there is not an accessible route to it?
In this case, the spring rocker being replaced would need to have the rocker seat height between 11 and 24 inches and clear floor or ground space and maneuvering space provided adjacent...
-
16. If a play surface is replaced with an accessible surface and the existing ground level play components are not accessible, do the components need to be replaced?
If the alteration to the play area only involves the surfacing, only the surface along accessible routes, clear floor or ground spaces, and maneuvering spaces must comply with the ASTM F...
-
308.3.1 Unobstructed
Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1220 mm) maximum and the low side...
-
R403 Operable Parts (Section-by-Section Analysis)
operable parts apply to operable parts on accessible pedestrian signals and pedestrian pushbuttons (see R209) and parking meters and parking pay stations that serve accessible parking spaces...
-
406.6 Diagonal Curb Ramps
The bottom of diagonal curb ramps shall have a clear space 48 inches (1220 mm) minimum outside active traffic lanes of the roadway....
-
213.3.1 Toilet Compartments
A toilet compartment is a partitioned space that is located within a toilet room, and that normally contains no more than one water closet....
-
1016.9 Protruding Objects
This section requires constructed elements on outdoor recreation access routes, resting intervals, and passing spaces to comply with the technical requirements for protruding objects in...
-
5.4 Dining Areas
conditions: 1) the area of mezzanine seating measures no more than 33 percent of the area of the total accessible seating area; 2) the same services and decor are provided in an accessible space...
-
EXECUTIVE SUMMARY
EXECUTIVE SUMMARY The Rehabilitation Engineering Research Center at the Lexington School for the Deaf was charged with recommending performance standards for Assistive Listening Systems...
-
Employee Work Area
All or any portion of a space used only by employees and used only for work. Corridors, toilet rooms, kitchenettes and break rooms are not employee work areas....
-
Self-Service Storage
Building or facility designed and used for the purpose of renting or leasing individual storage spaces to customers for the purpose of storing and removing personal property on a self-service...
-
M305.3.1.1 Horizontal Position
The length of gripping surfaces on horizontal standing supports shall be 4 inches (100 mm) minimum except for diagnostic equipment containing a wheelchair space which shall comply with M305.3.1.2...
-
1133A.2, Item 1
A clear floor space at least 30 inches (762 mm) by 48 inches (1219 mm) that allows a parallel approach by a person in a wheelchair shall be provided at the range or cooktop....
-
§382.65(c)(2)
(2) The chair must be designed to be compatible with the maneuvering space, aisle width, and seat height of the aircraft on which it is to be used, and to be easily pushed, pulled, and turned...
-
306.2.1 General
Space under an element between the finish floor or ground and 9 inches (230 mm) above the finish floor or ground shall be considered toe clearance and shall comply with 306.2....
-
306.2.1 General
Space under an element between the finish floor or ground and 9 inches (230 mm) above the finish floor or ground shall be considered toe clearance and shall comply with 306.2....