904.3.3 Check Writing Surfaces. Where provided, check writing surfaces shall comply with 902.3....
Search Results "Road Surface Treatment"
Filters
Commonly Searched Documents
-
904.3.3 Check Writing Surfaces
-
Summary: What Every Playground Owner Should Know About the Accessibility of Their Playground Surfaces
Decision makers should engage with suppliers to gather information on various surfaces and evaluate surface options....
-
Design of Shared Use Paths, Street Intersections, and Midblock Crossings
a small portion of the design professionals preparing designs and construction documents of signalized roadway and street intersections, midblock pedestrian signals, shared use paths, roads...
-
Slip Resistance
Accessible surfaces must be slip resistant to minimize hazards to people with disabilities, especially those who are ambulatory or semi-ambulatory or who use canes, crutches, and other...
-
11B-1008.2.6 Ground surfaces
Ground surfaces on accessible routes, clear floor or ground spaces, and turning spaces shall comply with Section 11B-1008.2.6. [2010 ADAS] Advisory 1008.2.6 Ground Surfaces. ...
-
11B-1008.2.6 Ground surfaces
Ground surfaces on accessible routes, clear floor or ground spaces, and turning spaces shall comply with Section 11B-1008.2.6. [2010 ADAS] Advisory 1008.2.6 Ground Surfaces....
-
11B-1008.2.6 Ground surfaces
Ground surfaces on accessible routes, clear floor or ground spaces, and turning spaces shall comply with Section 11B-1008.2.6. Advisory 11B-1008.2.6 Ground surfaces....
-
11B-302.1 General
A stable surface is one that remains unchanged by contaminants or applied force, so that when the contaminant or force is removed, the surface returns to its original condition....
-
11B-302.1 General
A stable surface is one that remains unchanged by contaminants or applied force, so that when the contaminant or force is removed, the surface returns to its original condition....
-
11B-302.1 General
A firm surface resists deformation by either indentations or particles moving on its surface....
-
General: ADA Standard Section 505.1
Section 505.1 of the ADA Standards covers information in the current ADA Standards for handrails.
-
11B-505.1 General
Handrails provided along walking surfaces complying with Section 11B-403, required at ramps complying with Section 11B-405, and required at stairs complying with Section 11B-504 shall comply...
-
T302 Walking Surfaces
The technical requirements for walking surfaces include provisions on slip resistance, the maximum size of surface openings, and the maximum height of vertical surface discontinuities (i.e...
-
4.2.4.3 Surfaces for Wheelchair Spaces
Clear floor or ground spaces for wheelchairs shall comply with 4.5.
-
4.2.4.3 SURFACES FOR WHEELCHAIR SPACES
Clear floor or ground spaces for wheelchairs shall comply with 4.5.
-
Accessibility
Rotational penetrometer shown in use on surface A2. Figure 3. Rotational penetrometer shown in use on surface A2. Figure 4....
-
Costs and Benefits
Consistent with Executive Orders 12866 and 13563, the Access Board prepared a final regulatory assessment (Final RA) to assess the likely costs and benefits of new or revised...
-
II. Rulemaking History
The Americans with Disabilities Act (ADA) requires the Access Board to issue guidelines for transportation vehicles—including buses, OTRBs, and vans—to ensure that new, used and...
-
8. Add § 37.169 to read as follows
8. Add § 37.169 to read as follows:
-
§ 38.159(c)(5) Slope
(5) Slope. Ramps shall have the least slope practicable and shall not exceed 1:4 when deployed to ground level. If the height of the vehicle floor from which the ramp is deployed is...
-
§ 38.159(d)(7) Seat belt and shoulder harness
(7) Seat belt and shoulder harness. For each wheelchair or mobility aid securement device provided, a passenger seat belt and shoulder harness, complying with all applicable...
-
302.1 General
Floor and ground surfaces shall be stable, firm, and slip resistant and shall comply with 302. EXCEPTIONS: 1....
-
302.1 General
Floor and ground surfaces shall be stable, firm, and slip resistant and shall comply with 302. EXCEPTIONS: 1....