(1) The landing shall be at least as wide as the ramp run leading to it....
Search Results "Ramped Entry"
Filters
Commonly Searched Documents
-
4.8.4(1)
-
4.8.3 CLEAR WIDTH
The minimum clear width of a ramp shall be 36 in (915 mm)....
-
1008.2.5.3 Handrails
Where required on ramps serving play components, the handrails shall comply with 505 except as modified by 1008.2.5.3. EXCEPTIONS: 1....
-
R407.7 Surfaces
Surfaces of ramp runs and landings shall comply with R302.7....
-
406.1 General
Curb ramps on accessible routes shall comply with 406, 405.2 through 405.5, and 405.10....
-
406.1 General
Curb ramps on accessible routes shall comply with 406, 405.2 through 405.5, and 405.10....
-
4.7.1 Location
Curb ramps complying with 4.7 shall be provided wherever an accessible route crosses a curb....
-
4.7.1 LOCATION
Curb ramps complying with 4.7 shall be provided wherever an accessible route crosses a curb....
-
11B-405.7.3.1
Bottom landings shall extend 72 inches (1829 mm) minimum in the direction of ramp run....
-
R407.5 Rise
The rise for any ramp run shall be 760 mm (2.5 ft) maximum....
-
11B-405.7.3.1
Bottom landings shall extend 72 inches (1829 mm) minimum in the direction of ramp run....
-
11B-405.7.3.1
Bottom landings shall extend 72 inches (1829 mm) minimum in the direction of ramp run....
-
406.1 General
Curb ramps on accessible routes shall comply with 406, 405.2 through 405.5, and 405.10....
-
R407.8 Handrails
Ramp runs with a rise greater than 150 mm (6 in) shall have handrails complying with R409....
-
4.8.4(3)
(3) If ramps change direction at landings, the minimum landing size shall be 60 in by 60 in (1525 mm by 1525 mm)....
-
Transfer Entry: ADA Standard Section 1002.5.3
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat.
-
R407.4 Width
The clear width of a ramp run and, where handrails are provided, the clear width between handrails shall be 915 mm (3.0 ft) minimum....
-
Error/Omission: Parts of an accessible route with slopes that exceed 1:20 lack required features including handrails and edge protection.
Any part of an accessible route with a slope greater than 1:20 shall be considered a ramp and shall comply with 4.8....
-
§ 38.83(c) Vehicle ramp or bridge plate
(c) Vehicle ramp or bridge plate—...
-
406.6 Diagonal Curb Ramps
406.6 Diagonal Curb Ramps. Diagonal or corner type curb ramps with returned curbs or other well-defined edges shall have the edges parallel to the direction of pedestrian flow....
-
1015.3 Height
On ramps and ramped aisles, from the ramp surface at the guard....
-
406.6 Diagonal Curb Ramps
Diagonal curb ramps provided at marked crossings shall provide the 48 inches (1220 mm) minimum clear space within the markings....
-
Slope and Rise [4.8.2]
1:19 5.26% .0526 3.01 1:20 5.00% .0500 2.86 1:50 2.00% .0200 1.15 Slope and length greatly determine a ramp's...
-
4.8.2* Slope and Rise
The least possible slope shall be used for any ramp. The maximum slope of a ramp in new construction shall be 1:12. The maximum rise for any run shall be 30 in (760 mm) (see Fig. 16)....