(4) Ramp barriers. Each side of the ramp shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off.
Search Results "RV: Recreational Vehicle"
-
§ 38.23(c)(4) Ramp barriers
-
§ 38.27(b)
(b) Each securement location shall have a sign designating it as such.
-
§ 38.83(b)(4) Power or equipment failure
(4) Power or equipment failure. Lift platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or...
-
§ 38.83(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during...
-
§ 38.83(b)(11) Boarding direction
(11) Boarding direction. The lift shall permit both inboard and outboard facing of wheelchairs and mobility aids.
-
§ 37.83 Remanufacture of rail vehicles and purchase or lease of remanufactured rail vehicles by public entities operating rapid or light rail systems
[See subsections ...]
-
T206 Handrails, Stanchions, and Handholds
The 2016 Non-Rail Vehicle Guidelines, as with the existing guidelines, require handrails, stanchions, or handholds to be provided at passenger doorways, fare collection devices (where such...
-
On existing locations when we add an EV station as van accessible how do we address taking two spaces from the facility (losing a space) and then not having the mandatory spaces remaining for the facility?
Consistent with the state’s policies on electric vehicles, DSA encourages city and county officials to recognize the necessary impact of EVCS and adopt responsive ordinances consistent with...
-
We are also being asked to show the future space for the 1 Van accessible EV space that would be required in the future, if the equipment was installed. And due to the requirement for the access aisle beside this space, in the future it would be converted to an access aisle resulting in the loss of one parking space. As this project is right at the required number of parking spaces per zoning, it is not acceptable to the zoning reviewer to sign off on a plan that shows a “future access aisle for future EV van accessible charging space,” as they are approving the loss of a parking space, even though this would not happen until a future condition, upon which I assume there would be some review process for installation of EV charging equipment. What is the appropriate path forward in this situation?
Consistent with the state’s policies on electric vehicles, DSA encourages city and county officials to recognize the necessary impact of EVCS and adopt responsive ordinances consistent with...
-
3.1.1.2 Camping and Picnic Vehicle Parking Spurs
Where a parking spur is adjacent or attached to a picnic unit or a camping unit living area, it shall comply with section 3.3 as well as 3.1.
-
1012.1 General
This section contains the technical requirements for parking spaces provided within camping units and picnic units with mobility features and pull-up spaces for recreational vehicles at...
-
Currently, the DCFC time limit is 30 minutes maximum. New larger battery capacity will take longer to get 80% charge – i.e. Chevy Bolt EV, Tesla Model 3, 2018 Nissan LEAF, etc. Can we reconsider the time limit?
Where DCFC or any other type of charging is intended for use longer than 30 minutes, EVCS may be provided in regular parking-style vehicle spaces....
-
National Highway Traffic Safety Administration
The introduction of new technology continues to broaden opportunities for people with disabilities to drive vehicles with adaptive devices....
-
4.7.1 General
Electric, water, sewage, and other types of utilities shall comply with section 4.7. All utilities required to be accessible shall be connected to an ORAR complying with section...
-
11B-208.1 General
SECTION TITLE NOTES 11B-208.1 Parking Spaces General Related code amendment,...
-
11B-812.8 Identification signs
EVCS identification signs shall be provided in compliance with Section 11B-812.8.
-
§ 38.23(b)(6) Platform surface
(6) Platform surface. The platform surface shall be free of any protrusions over 1/4 inch high and shall be slip resistant. The platform shall have a minimum clear width of 28 1/2...
-
11B-812.5 Accessible routes
[See subsections ...]
-
11B-812.8 Identification signs
EVCS identification signs shall be provided in compliance with Section 11B-812.8.
-
11B-812.5 Accessible routes
[See subsections ...]
-
12148(b)(2) Historic trains
(2) Historic trains In order to comply with paragraph (1) with respect to the remanufacture of a vehicle of historic character which is to be used on a segment of a light or rapid rail...
-
§ 38.73(d)(1) Requirements
The design of level-entry vehicles shall be coordinated with the boarding platform or mini-high platform design so that the horizontal gap between a vehicle at rest and the platform shall...
-
§ 38.23(d)(4) Orientation
front of the vehicle....
-
1.1 Conditions for an Exception
Where one or more of the following conditions exists in an outdoor recreation area, an "exception" provided in the guidelines for that specific technical requirement can be used where...