[See subsections ...]
Search Results "EVCS: Electric Vehicle Charging Station"
-
11B-218 Transportation facilities
-
11B-218.1 General
Transportation facilities shall comply with Section 11B-218.
-
218 Transportation Facilities
[See subsections ...]
-
218.1 General
Transportation facilities shall comply with 218.
-
218 Transportation Facilities
218 Transportation Facilities
-
218.1 General
218.1 General. Transportation facilities shall comply with 218.
-
§ 38.23(c)(6) Attachment
When in use for boarding or alighting, the ramp shall be firmly attached to the vehicle so that it is not subject to displacement when loading or unloading a heavy power mobility aid and...
-
10.1 General
Every station, bus stop, bus stop pad, terminal, building or other transportation facility, shall comply with the applicable provisions of 4.1 through 4.35, sections 5 through 9, and the...
-
§ 38.23(b)(8) Platform entrance ramp
(8) Platform entrance ramp. The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8, measured on level ground, for a maximum rise of 3 inches, and...
-
Requirements to Remember for: Remanufacture or Rebuilt Vehicles
[See subsections ...]
-
Section 206.3
However, we believe it is useful to make explicit the concept that, in transportation facilities such as rail stations, important facility elements are placed so as to minimize the distance...
-
11B-218.2 New and altered fixed guideway stations
New and altered stations in rapid rail, light rail, commuter rail, intercity rail, high speed rail, and other fixed guideway systems shall comply with Sections 11B-810.5 through 11B-810.10...
-
11B-218.2 New and altered fixed guideway stations
New and altered stations in rapid rail, light rail, commuter rail, intercity rail, high speed rail, and other fixed guideway systems shall comply with Sections 11B-810.5 through 11B-810.10...
-
§ 38.159(c)(5) Slope
If the height of the vehicle floor from which the ramp is deployed is 3 inches (75 mm) or less above a 6 inch (150 mm) curb, a maximum slope of 1:4 is permitted; if the height of the vehicle...
-
10.3.1(6)
(6) Lists of stations, routes, or destinations served by the station and located on boarding areas, platforms, or mezzanines shall comply with 4.30.1, 4.30.2, 4.30.3, and 4.30.5....
-
11B-205.1 General
Electrical or communication receptacles serving a dedicated use shall not be required to comply with Section 11B-309. 3. Reserved. [2010 ADA Standards] 3....
-
11B-205.1 General
Electrical or communication receptacles serving a dedicated use shall not be required to comply with Section 11B-309. 3. Reserved. [2010 ADA Standards] 3....
-
10.3.1(2)
(2) In lieu of compliance with 4.1.3(8), at least one entrance to each station shall comply with 4.14, Entrances....
-
§ 38.83(b)(2)(i) Requirements
The controls shall be interlocked with the vehicle brakes, propulsion system, or door, or shall provide other appropriate mechanisms or systems, to ensure that the vehicle cannot be moved...
-
§ 38.23(d)(5) Movement
accordance with manufacturer's instructions, the securement system shall limit the movement of an occupied wheelchair or mobility aid to no more than 2 inches in any direction under normal vehicle...
-
Changes in Level and Horizontal Gaps
The referenced vehicle guidelines (like those of the proposed rule) permit the use of mini high platforms, car-borne or platform-mounted lifts, ramps or bridge plates, or manually deployed...
-
Can an operator require a person to transfer from a wheelchair to a vehicle seat?
Section 37.165(e) of the DOT ADA regulations allows persons who use wheelchairs to transfer to a vehicle seat, if one is available....
-
Can an operator require a person to transfer from a wheelchair to a vehicle seat?
Section 37.165(e) of the DOT ADA regulations allows persons who use wheelchairs to transfer to a vehicle seat, if one is available....
-
12162(a)(2)(C)(i)
(i) be able to be entered from the station platform by an individual who uses a wheelchair; or...