The floor or landing on the dwelling unit side of the primary entry door and any required exit door shall have a minimum length of not less than 44 inches (1118 mm)....
Search Results "Unit of Measurement"
-
1132A.5.1 General
-
1132A.5.1 General
The floor or landing on the dwelling unit side of the primary entry door and any required exit door shall have a minimum length of not less than 44 inches (1118 mm)....
-
Dispersion [F244.2.2]
Camping units with mobility features must provide choices of units comparable to and integrated with those available to all other campers....
-
The Dipstick® Floor Profiler Tool
Advantages The Dipstick Auto-Read Floor Profiler is a totally integrated data collection instrument that provides a fast and accurate method of measuring floors for flatness and levelness...
-
233.3.5 Dispersion
Residential dwelling units required to provide mobility features complying with 809.2 through 809.4 and residential dwelling units required to provide communication features complying with...
-
233.3.5 Dispersion
Residential dwelling units required to provide mobility features complying with 809.2 through 809.4 and residential dwelling units required to provide communication features complying with...
-
11B-233.3.1.2.5 Multi-story residential dwelling units in buildings with no elevator
In non-elevator buildings, a minimum of 10 percent but not less than one of the ground floor multi-story residential dwelling units shall be calculated using the total number of multi-story...
-
General: ADA Standard Section 229.1
Section 229.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for windows.
-
233.3 Residential Dwelling Units Provided by Entities Not Subject to HUD Section 504 Regulations
Facilities with residential dwelling units provided by entities not subject to regulations issued by the Department of Housing and Urban Development (HUD) under Section 504 of the Rehabilitation...
-
1012.1 General
This section contains the technical requirements for parking spaces provided within camping units and picnic units with mobility features and pull-up spaces for recreational vehicles at...
-
Alterations: ADA Standard Section 233.3.4
Section 233.3.4: covers scoping requirements in the current ADA Standards for alterations to residential facilities.
-
233 Residential Facilities
Under this exception, where it is technically infeasible to provide a fully accessible unit or an accessible route to such a unit, then a comparable unit at a different location under an...
-
F245.2.5 Elements within Picnic Units with Mobility Features
This section contains the scoping requirements for elements within picnic units required to provide mobility features, including outdoor constructed features (F244.2.5.1) and parking spaces...
-
233.3.1 Minimum Number: New Construction
Newly constructed facilities with residential dwelling units shall comply with 233.3.1....
-
106.5 Defined Terms, F106.5 Defined Terms
* * * * * Emergency Transportable Housing Unit....
-
Dispersion [F245.2.4]
Picnic units with mobility features must provide choices of picnic units comparable to, and integrated with, those available to others....
-
Door Hardware
A few commenters requested that lever hardware be required on doors throughout dwelling units, not only at the entry door to the dwelling unit. Response....
-
233.3.1 Minimum Number: New Construction
Newly constructed facilities with residential dwelling units shall comply with 233.3.1....
-
F244.2.2 Dispersion
This section requires camping units with mobility features to provide choices of camping units comparable to, and integrated with, those available to others....
-
F245.2.4 Dispersion
This section requires picnic units with mobility features to provide choices of picnic units comparable to, and integrated with, those available to others....
-
1012 Parking Spaces within Camping Units and Picnic Units and Pull-Up Spaces at Dump Stations
[See subsections ...]
-
1012 Parking Spaces Within Camping Units and Picnic Units and Pull-Up Spaces at Dump Stations
[See subsections ...]
-
1133A.2.1 Clear width
Kitchens shall have a minimum clear width measured between any cabinet, countertop or the face of any appliance (excluding handles and controls) that projects into the kitchen and the opposing...
-
1133A.2.1 Clear width
Kitchens shall have a minimum clear width measured between any cabinet, countertop or the face of any appliance (excluding handles and controls) that projects into the kitchen and the opposing...
