Standard U-shaped pulls and lever-shaped handles are acceptable. Stationary knobs with a shape that can be loosely gripped also are acceptable....
Search Results "U-Shaped Kitchen"
Filters
Commonly Searched Documents
-
Handles, Pulls, and Knobs
-
4.25.4 Hardware
Touch latches and U-shaped pulls are acceptable....
-
4.25.4 HARDWARE
Touch latches and U-shaped pulls are acceptable....
-
Lift-U® Fold-Out Ramp Plus
Lift-U’s® newest generation LU11 ramp not only offers a reduced slope of 1:6 but now facilitates an increased load capacity of 950 pounds....
-
Whitehall Mfg. 24" Grab Bar L-Shaped Closure Plate
Model Number: Â 1110-1 Features: 304 stainless steel cylindrical tub construction; a L-shaped closure plate is welded on to meet Ligature-Resistant requirements....
-
Pressalit Care Mixer Tap with Long Rotatable Spout and Ring-Shaped Operating Lever
Mixer tap with long rotatable spout and ring-shaped operating lever with water-saving Eco-effect. ...
-
Why test on straight courses and P-shaped turning courses?
Why test on straight courses and P-shaped turning courses?...
-
10. Can a transfer platform be an irregular shape as long as it incorporates the minimum rectangle of 14 by 24 inches?
Can a transfer platform be an irregular shape as long as it incorporates the minimum rectangle of 14 by 24 inches? Yes....
-
Lift-U® Fold-Out Rising Floor Ramp
Lift-U® has developed a fold-out style ramp that features a Rising Floor....
-
1. Faucets
Lever-operated, push-type mechanisms, and U-shaped handles are acceptable designs....
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the...
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the...
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the...
-
4.13.9* Door Hardware
Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching...
-
4.34.6.10* KITCHEN STORAGE
Cabinets, drawers, and shelf areas shall comply with 4.25 and shall have the following features: (1) Maximum height shall be 48 in (1220 mm) for at least one shelf of all cabinets...
-
Lift-U® LU12 Step/Platform Onboard Lift
The Lift-U® model LU12 Wheelchair Lift, is our STEP / PLATFORM onboard lift. The lift can be mounted either at the front or rear door entrance....
-
22.1 Q. Must the switches on range hood kitchen ventilation fans be in accessible locations?
Kitchen ventilation fans located on a range hood are considered to be part of the appliance....
-
4.13.9* DOOR HARDWARE
Handles, pulls, latches, locks, and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require tight grasping, tight pinching...
-
A4.2.3 Wheelchair Turning Space
These guidelines specify a minimum space of 60 in (1525 mm) diameter or a 60 in by 60 in (1525 mm by 1525 mm) T-shaped space for a pivoting 180-degree turn of a wheelchair....
-
Access Board: T-Shaped Space
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
Operating Hardware
Operating Hardware Common Problem: The shape of the hardware on accessible doors, and on faucets, fixed lamps, drapery controls, and heating and air conditioning controls in spaces...
-
AJW Architectural Products UG120-U Series UG120-U 29" Swing-Up, 1.25" Diameter Grab Bar - Configuration U
Product Features 1 1/4" bar diameter Exposed Flange Custom sizes available upon request Powder Coating available upon request Product Specs Mounting Plate:...
-
Accessible Pathway & Corridor: Minimum Clear Width Required for 180-degree Turn Around Barrier
This data depicts the amount of space required by users of wheeled mobility devices to perform a 180-degree turn ("U-Turn") around an obstruction....
