A door pull complying with Section 11B-404.2.7 shall be placed on both sides of the door near the latch. ...
Search Results "Security Latch"
-
11B-604.8.1.2 Doors
-
11B-604.8.1.2 Doors
A door pull complying with Section 11B-404.2.7 shall be placed on both sides of the door near the latch....
-
T604.1 General
When wheelchair securement systems are not in use, the systems shall not protrude into the wheelchair space except as provided in T603.5, and shall not interfere with passenger movement...
-
D.4. - Is an agency ever required to fundamentally alter its needs in order to comply with Section 508?
For example, if an agency needs to meet certain security needs by acquiring secure telephone units that are all analog, the agency would not be required to buy digital phones if such phones...
-
Clearances: ADA Standard Section 1002.4.4
Where provided, securement devices shall be permitted to overlap required clearances. 2. Wheelchair spaces shall be permitted to be mechanically or manually repositioned. 3....
-
§ 38.29(f)
(f) For vehicles in excess of 22 feet in length, the minimum interior height along the path from the lift to the securement location shall be 68 inches....
-
DORMA 8000 Series Exit Device
Exit device with deadlocking latch bolt The 8000 Series exit devices with deadlocking latch bolts minimize forced entry while offering a low-cost solution to security and life safety...
-
Clear Width: ADA Standard Section 404.2.3
Section 404.2.3 covers the current ADA Standards for clear width at manual doors, doorways and manual gates that are part of an accessible route.
-
11B-404.2.3 Clear width
Exceptions: In alterations, a projection of 5/8 inch (15.9 mm) maximum into the required clear width shall be permitted for the latch side stop....
-
11B-404.2.3 Clear width
Exceptions: In alterations, a projection of 5/8 inch (15.9 mm) maximum into the required clear width shall be permitted for the latch side stop....
-
11B-809.8.3 Door maneuvering clearance.
Maneuvering clearances shall extend the full width of the doorway and the required latch side or hinge side clearance....
-
Problem Four (Entrance)
Problem Four: The entrance door has a door knob and/or latch that requires tight pinching and twisting and is not accessible....
-
4.1.6(4)(d)
(i) Where existing elements prohibit strict compliance with the clearance requirements of 4.13.5, a projection of 5/8 in (16 mm) maximum will be permitted for the latch side door stop....
-
§382.127(c)
mobility device has been labeled by the manufacturer as non-spillable as provided in 49 CFR 173.159(d)(2), or if a battery-powered wheelchair with a spillable battery can be loaded, stored, secured...
-
11B-1002.4.4 Clearances
Exceptions: Where provided, securement devices shall be permitted to overlap required clearances....
-
11B-1002.4.4 Clearances
Exceptions: Where provided, securement devices shall be permitted to overlap required clearances....
-
404.2.7 Door and Gate Hardware
Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with 309.4....
-
404.2.7 Door and Gate Hardware
Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with 309.4....
-
Maneuvering Clearances [§404.2.4]
Clearance beyond the latch side is not required at entry doors to hospital patient rooms. ...
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
DOORS MINIMUM MANEUVERING CLEARANCE Approach direction Perpendicular to doorway Parallel to doorway (beyond stop/latch...
-
Bathtub Seats: ADA Standard Section 610.2
Section 610.2 covers the current ADA Standards for bathtub seats.
-
11B-610.2 Bathtub seats
The seat shall be capable of secure placement....
-
11B-411.2.1.1 Location
consoles beyond those required by Section 11B-411.2.1.1 shall be permitted to be provided outside the elevator landing and to be wall-mounted, pedestal-mounted, or mounted on a kiosk or security...
-
11B-411.2.1.1 Location
consoles beyond those required by Section 11B-411.2.1.1 shall be permitted to be provided outside the elevator landing and to be wall-mounted, pedestal-mounted, or mounted on a kiosk or security...
