D. Does each accessible parking space have a post- or wall-mounted sign with the symbol of accessibility mounted high enough so the sign is visible when a vehicle is parked in the...
Search Results "Seat Height"
-
D. Sign Height
-
Coin Slot Height
a. Is it mounted with the coin slot no higher than 54" above the floor? Yes __ No __ N/A __ Comments: ___________________________________________
-
Coin Slot Height
a. Is it mounted with the coin slot no higher than 54" above the floor, and one pay phone on that floor with the highest operable element no higher than 48" above the floor? Yes...
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3.
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3.
-
11B-411.4.11.1 Height
Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3.
-
Accessible seating must be an integral part of the seating plan
• Accessible seating must be an integral part of the seating plan so that people using wheelchairs are not isolated from other spectators or their friends or family....
-
Seating for Communication
Seating for Communication: Arrange the lighting and meeting room furniture to facilitate communication among participants, interpreters, and realtime captioners....
-
Companion Seats
Companion Seats Where companion seating is provided on a ride, companion seating adjacent to wheelchair spaces is also required in some cases....
- American Standard Commercial Toilet Seat for Baby Devoro Bowls
- Steelcase Ology Series Height-Adjustable Table
-
4.35.4 Bench
Every accessible dressing room shall have a 24 in by 48 in (610 mm by 1220 mm) bench fixed to the wall along the longer dimension. The bench shall be mounted 17 in to 19 in (430 mm...
- AJW Architectural Products U852 Dual Stall Seat Cover Dispenser - Partition Mounted
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground.
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground.
-
11B-902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground.
-
§ 35.151(g)(3)
(3) Facilities that have more than 5,000 seats shall provide at least five wheelchair locations that are configured to provide at least three companion seats for each wheelchair space; and...
- Bobrick ClassicSeries Surface Mounted Seat-Cover Dispenser B-221
- Bobrick ConturaSeries Surface-Mounted Seat-Cover Dispenser B-4221
- Humanscale's Float Height-Adjustable Table
-
11B-504.2 Treads and risers
All steps on a flight of stairs shall have uniform riser heights and uniform tread depths. Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum....
-
11B-504.2 Treads and risers
All steps on a flight of stairs shall have uniform riser heights and uniform tread depths. Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum....
-
Methodology
This study was approved by the University of Pittsburgh's Institutional Review Board and all participants provided informed consent before participating in any test procedures.
-
You shall not exclude a passenger with a disability from any seat in an exit or other row except to comply with FAA safety rules
You shall not exclude a passenger with a disability from any seat in an exit or other row solely on the basis of his or her disability except to comply with FAA safety rules....