II ยง35.151(k) New Construction and Alterations; Detention and Correctional Facilities: [ADA Title II] U.S....
Search Results "Plumbing Facility"
Commonly Searched Documents
-
11B-232.1 General
-
232 Detention Facilities and Correctional Facilities
232 Detention Facilities and Correctional Facilities Section 232 of the 2010 Standards establishes requirements for the design and construction of cells, medical care facilities, and...
-
11B-203.8 Residential facilities
11B-203.8 Residential facilities....
-
Transportation Facilities
Bus stops and stations, rail stations, and other transportation facilities are required to be accessible by the ADA....
-
Recreational Boating Facilities: ADA Standard Section 206.2.10
Section 206.2.10 covers scoping requirements in the most current ADA Standards for accessible routes to recreational boating facilities
-
11B-805.3.1 Wheelchair spaces
Exception: In waiting rooms serving facilities specializing in treating conditions that affect mobility, 10 percent of the seating shall be wheelchair spaces complying with Section 11B-802.1...
-
Employee Parking Lot
Parking lots are considered parking facilities per the 2010 ADA Standard, Section 208.2 and Advisory 208.2....
-
11B-202 Existing buildings and facilities.
[See subsections ...]
-
11B-202 Existing buildings and facilities
[See subsections ...]
-
11B-233 Public housing facilities
[See subsections ...]
-
806.2.4 Toilet and Bathing Facilities
806.2.4 Toilet and Bathing Facilities. At least one bathroom that is provided as part of a guest room shall comply with 603....
-
Effect on Removal of Barriers in Existing Facilities: ADA Standard Section 101.2
Section 101.2 of the ADA Standards covers the effects of the removal of barriers in existing facilities.
-
Parallel Approach to Kitchen Sinks
Comment. Commenters recommended that a parallel approach should be allowed at kitchen sinks in spaces without a cook top or conventional range, consistent with the ANSI A117.1...
-
608.3.1 Transfer Type Shower Compartments
In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (455 mm) from the control wall. Figure 608.3.1 Grab Bars...
-
608.3.1 Transfer Type Shower Compartments
In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (455 mm) from the control wall.
-
2. Roll-in Shower Size
2. If there are more than 50 guestrooms/suites, are all required roll-in showers at least 30" wide by 60" long or 36" wide by 60", as configured in Figure 57 below, so persons who...
-
608.3.1 Transfer Type Shower Compartments
608.3.1 Transfer Type Shower Compartments. In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (455 mm) from the...
-
Q. Other Showers in Accessible Guestrooms/Suites
Q. Other Showers in Accessible Guestrooms/Suites - Accessible guestrooms/suites that are not required to have roll-in showers may have an accessible bathtub, a small shower as shown...
-
4.24.3 Knee Clearance
Knee clearance that is at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall be provided underneath sinks.
-
4.24.3 KNEE CLEARANCE
Knee clearance that is at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall be provided underneath sinks.
-
11B-608.3.1 Reserved
11B-608.3.1 Reserved.
-
11B-211 Drinking fountains and bottle filling stations
11B-211 Drinking fountains and bottle filling stations
-
11B-608.3.1 Transfer type shower compartments
In transfer type compartments, grab bars shall be provided across the control wall and back wall to a point 18 inches (457 mm) from the control wall.
-
11B-602 Drinking fountains and bottle filling stations
11B-602 Drinking fountains and bottle filling stations