Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
Search Results "Occupant Load"
2010 ADA Definition
Occupant Load: The number of persons for which the means of egress of a building or portion of a building is designed.
Filters
Commonly Searched Documents
-
11B-611.4 Height
-
Tork Image Design H2 463002 Wall Mounted Load Refill Video
-
11B-703.1.1.2 Inspection
Signs and identification devices shall be field inspected after installation and approved by the enforcing agency prior to the issuance of a final certificate of occupancy per Chapter 1,...
-
Wheelchair Space
Space for a single wheelchair and its occupant....
-
WHEELCHAIR SPACE
A space for a single wheelchair and its occupant....
-
1607A.9.2 Grab bars, shower seats and accessible benches
Grab bars, shower seats and accessible benches shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab bar, shower...
-
1607.9.2 Grab bars, shower seats and accessible benches
Grab bars, shower seats and accessible benches shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab bar, shower...
-
11B-1009.2.6 Footrests and armrests
The armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised (load) position....
-
Building
Any structure used or intended for supporting or sheltering any use or occupancy....
-
11B-216.3 Directional and informational signs
Information about interior spaces and facilities includes rules of conduct, occupant load, and similar signs....
-
11B-216.3 Directional and informational signs
Information about interior spaces and facilities includes rules of conduct, occupant load, and similar signs....
-
11B-216.3 Directional and informational signs
Information about interior and exterior spaces and facilities includes rules of conduct, occupant load, and similar signs....
-
CLEAR FLOOR SPACE
[DSA-AC] The minimum unobstructed floor or ground space required to accommodate a single, stationary wheelchair and occupant....
-
1015.3 Height
Exceptions: For occupancies in Group R-3, and within individual dwelling units in occupancies in Group R-2, guards on the open sides of stairs shall have a height not less than 34...
-
1607A.8 Loads on hand mils, guards, grab bars and seats
[See subsections ...]
-
1015.2 Where required
Exception: Guards are not required for the following locations: On the loading side of loading docks or piers....
-
Slope: ADA Standard Section 1002.4.2
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
-
11B-1002.4.2 Slope
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
-
11B-233.3.4.3 Alterations to residential dwelling units with adaptable features
standards for residential dwelling units with adaptable features do not apply to the alteration, repair, rehabilitation or maintenance of residential dwelling units constructed for first occupancy...
-
Clear Floor or Ground Space: ADA Standard Section 1002.5.1
A clear floor or ground space complying with 305 shall be provided in the load and unload area adjacent to the amusement ride seats designed for transfer....
-
11B-1002.5.1 Clear floor or ground space
A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the amusement ride seats designed for transfer....
-
1010.1.5 Floor elevation
In Group R-3 occupancies not required to be adaptable or accessible, the landing at an exterior doorway shall be not more than 7¾ inches (197 mm) below the top of the threshold, provided...
-
3306.2 Walkways
Walkways shall be accessible in accordance with Chapter 11A or 11B as applicable, and shall be designed to support all imposed loads, and the design live load shall be not less than 150...
-
Transfer Height: ADA Standard Section 1002.6.2
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
