Means, with respect to an alteration of a building or a facility, that it has little likelihood of being accomplished because existing structural conditions would require removing or altering...
Search Results "Loading Condition"
Filters
Commonly Searched Documents
-
4.1.6(1)(j) EXCEPTION
-
11B-403.5.1 Clear width
The clear width for walking surfaces in corridors serving an occupant load of 10 or more shall be 44 inches (1118 mm) minimum....
-
Rehabilitation Facilities and Outpatient Physical Therapy Facilities: ADA Standard Section 208.2.2
Section 208.2.2 covers scoping requirements in the current ADA Standards for accessible parking at rehabilitation and outpatient physical therapy facilities.
-
Inpro Corporation JointMaster® 300 Series Recessed Mount Floor Expansion Joint Covers
Features & Benefits Patented "no-bump" configuration ADA compliant Gasketed to eliminate transition rattle Standard load capabilities Recessed...
-
11B-208.2.2 Rehabilitation facilities and outpatient physical therapy facilities
Twenty percent of patient and visitor parking spaces provided to serve rehabilitation facilities specializing in treating conditions that affect mobility and outpatient physical therapy...
-
1607A.8 Loads on hand mils, guards, grab bars and seats
[See subsections ...]
-
1015.2 Where required
Exception: Guards are not required for the following locations: On the loading side of loading docks or piers....
-
Slope: ADA Standard Section 1002.4.2
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
-
11B-1002.4.2 Slope
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
-
Clear Floor or Ground Space: ADA Standard Section 1002.5.1
A clear floor or ground space complying with 305 shall be provided in the load and unload area adjacent to the amusement ride seats designed for transfer....
-
11B-1002.5.1 Clear floor or ground space
A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the amusement ride seats designed for transfer....
-
3306.2 Walkways
Walkways shall be accessible in accordance with Chapter 11A or 11B as applicable, and shall be designed to support all imposed loads, and the design live load shall be not less than 150...
-
Transfer Height: ADA Standard Section 1002.6.2
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
DRIVE AISLE
A vehicular way provided within a parking facility that connects vehicular entrances, parking stalls, electric vehicle charging stations, passenger loading zones, and vehicular exits....
-
§100.130 Discrimination in the terms and conditions for making available loans or other financial assistance.
[54 FR 3283, Jan. 23, 1989, as amended at 78 FR 11481, Feb. 15, 2013; 81 FR 63074, Sept. 14, 2016]
-
11B-1009.2.4 Seat
of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the raised (load...
-
Transfer Height: ADA Standard Section 1002.5.2
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
15. Q: The police department hires from a pool of applicants that have received conditional offers. Does the ADA allow a police department to re-rank the applicants in the pool based on the results of the medical examination?
The ADA allows police departments to make conditional job offers to a pool of applicants that is larger than the number of currently available vacancies if an employer can demonstrate that...
-
Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices: ADA Standard Section 206.2.9.2
Section 206.2.9.2 covers the ADA Standards for accessible routes to wheelchair spaces, ride seats designed for transfer and transfer devices in amusement rides.
-
Q5.) What dimensions and conditions can practitioners reasonably consider to be compliant when the conditions, as constructed, do not meet the technical requirements exactly and there are no official, published, industry-developed tolerances?
A5.) This is the most difficult question and the most subject to varying opinions. Sloped concrete and asphalt surfaces are an excellent example of this problem. To our...
-
Georgia-Pacific's Compact Side by Side Bath Tissue Dispenser - HD Supply Facilities Maintenance
Learn how to load the Georgia-Pacific's Compact side by side bath tissue dispenser....
-
Seat Height: ADA Standard Section 1009.2.4
of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised (load...
-
11B-502.3.3 Marking
The requirement that the hatching at the loading and unloading access aisle be a suitable contrasting color to the parking space is intended to ensure that the hatching is visually distinct...
