The 508 standards do not apply to ICT operated by agencies as part of a national security system, as defined by 40 U.S.C. 11103(a). Advisory E202.2 National Security Systems....
Search Results "Hybrid Surface System"
Commonly Searched Documents
-
E202.2 National Security Systems
-
Installation of Test Surfaces
Installation of Test Surfaces In accordance with standard EWF design and construction practice (Figure 2), the full depth surfaces were prepared to the same requirements needed for permanent...
-
Installation of Aggregate Surfaces at Bradford Woods
Installation of Aggregate Surfaces at Bradford Woods The installation of the aggregate surfaces at Bradford Woods conformed to the following protocol: Prior to installing the crushed...
-
11B-405.3 Cross slope
Cross slope is the slope of the surface perpendicular to the direction of travel....
-
Slip Resistance
Since rating systems are unique to the test method, specific levels of slip resistance can only be meaningfully specified according to a particular measurement protocol....
-
1014.3 Floor
This section requires the floor surface within camp shelters to be firm and stable and to slope not steeper than 1:48 in any direction....
- Envirobond is Self-Healing
- Organic-Lock: The Self-Healing Organic Binder
-
708 Two-Way Communication Systems
[See subsections ...]
-
219 and 706 Assistive Listening Systems
[See subsections ...]
-
708 Two-Way Communication Systems
[See subsections ...]
-
11B-706 ASSISTIVE LISTENING SYSTEMS
[See subsections ...]
-
11B-219 ASSISTIVE LISTENING SYSTEMS
[See subsections ...]
-
11B-706 Assistive listening systems
[See subsections ...]
-
A4.5.1 GENERAL
Wheelchairs can be propelled most easily on surfaces that are hard, stable, and regular....
-
R302.7 Surfaces
R302.7 Surfaces....
-
11B-305.2 Floor or ground surfaces
Floor or ground surfaces of a clear floor or ground space shall comply with Section 11B-302....
- LS-80 Basic Stationary IR System
-
409.4.2 Floor Surfaces
Floor surfaces in elevator cars shall comply with 302 and 303....
-
409.4.2 Floor Surfaces
Floor surfaces in elevator cars shall comply with 302 and 303....
-
Rollability and Smoothness of Walking Surfaces
surfaces....
-
M301.2 Transfer Surface (Section-by-Section Analysis)
This is an introductory section.
-
11B-306.2.3 Minimum required depth
The toe clearance shall extend 19 inches (483 mm) minimum under built-in dining and work surfaces required to be accessible by Section 11B-226.1....