EVCS identification signs shall be provided in compliance with Section 11B-812.8.
Search Results "Bus Station"
-
11B-812.8 Identification signs
-
T215 Communication Features
First, a large transit agency, while noting that its fixed route bus fleet was already equipped with automated announcement systems, nonetheless expressed concern about the cost of complying...
-
T402 Ramps and Bridgeplates
A bus manufacturer commented that the Federal Motor Vehicle Safety Standards (FMVSS) permit marking of the sides of the barriers to indicate the surface boundaries and warn passersby of...
-
T504 Passenger Access Routes
[See subsections ...]
-
CHAPTER 5: DOORWAYS, CIRCULATION PATHS AND FARE COLLECTION DEVICES
[See subsections ...]
-
T101.1 Purpose
These Non-Rail Vehicle Guidelines, which consist of Chapters 1 through 7, contain scoping and technical requirements for new, used or remanufactured non-rail vehicles to ensure their...
-
F. Chapter 5: Doorways, Circulation Paths, and Fare Collection Devices
Chapter 5 in the 2016 Non-Rail Vehicle Guidelines contains the technical requirements for doorways, illumination at doorways and boarding and alighting areas, passenger access...
-
Driving Ranges
Driving Ranges Both stand-alone driving ranges and driving ranges adjacent to a golf course that provide teeing stations or practice teeing grounds must comply with the following:...
-
12162(e)(2)(A)(ii)(II) Commuter rail
(II) Commuter rail Key stations in commuter rail transportation systems shall be made readily accessible to and usable by individuals with disabilities, including individuals who use...
-
What Works on NBC: Giving the Gift of Golf to Wounded Warriors
From NBC Nightly News, Thursday, June 14, 2007, reported by Roger O'Neil: News story about a Pro golfer, Jim Estes, who is helping wounded war veterans. Estes is providing free golf...
-
Elements Not Addressed in Final Rule
The final rule includes scoping and technical requirements for recreational vehicle parking spaces in camping units with mobility features and recreational vehicle pull-up spaces at dump stations...
-
907.2.6 Group I
Exception: Manual fire alarm boxes in patient sleeping areas of Group I-1 and I-2 occupancies shall not be required at exits if located at all nurse’s control stations or other constantly...
-
Section 37.33 Airport Transportation Systems
Section 37.33 Airport Transportation Systems Fixed route transportation systems operated by public airports are regarded by this section as fixed route commuter bus systems....
-
Transportation
□ Always consider transportation to events or meetings. Hold meetings or events close to transportation routes whenever possible. If transportation is provided to all participants,...
-
T402.5 Surfaces
Ramp and bridgeplate surface material shall comply with T302 and extend across the full width and length of the ramp or bridgeplate.
-
Roadway resurfacing, curb ramps at crosswalks
If roadways are being resurfaced or otherwise altered as part of a BRT project, curb ramps must be installed at crosswalks that have been affected. (DOT ADA Standard 106.5.)
-
R308.1.1.2 Grade
R308.1.1.2 Grade. Parallel to the street or highway, the grade of boarding and alighting areas shall be the same as the street or highway, to the extent practicable. Perpendicular to...
-
§ 37.73 Purchase or lease of used non-rail vehicles by public entities operating fixed route systems
[See subsections ...]
-
§ 38.159(d)(4) Orientation
(4) Orientation. At least one securement device or system required by paragraph (a) of this section shall secure the wheelchair or mobility aid facing toward the front of the...
-
§ 38.159(c)(4) Ramp barriers
(4) Ramp barriers. Each side of the ramp shall have barriers at least 2 inches (50 mm) high to prevent mobility aid wheels from slipping off.
-
§ 38.161 Moveable aisle armrests
A minimum of 50% of aisle seats, including all moveable or removable seats at wheelchair or mobility aide securement locations, shall have an armrest on the aisle side which can...
-
§ 38.155 Interior circulation, handrails and stanchions
[See subsections ...]
-
B. Restrooms
B. Restrooms. The following is provided to assist manufacturers and designers to create restrooms which can be used by people with disabilities. These specifications are derived from...
-
§ 38.153(a)
(a) Floor surfaces on aisles, step treads and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant.