Search Results "Bathtub Clearance"
Filters
Commonly Searched Documents
-
609.3 Grab Bar Vertical Clearance
-
Position of Grab Bars: ADA Standard Section 609.4
Section 609.4 covers the current ADA Standards for the position of grab bars.
-
1132A.5.2 Strike edge maneuvering space at doors
Twenty-four inches (610 mm) is preferred for strike edge clearance. ...
-
11B-809.10.4 Sufficient maneuvering space
The clear maneuvering space shall be permitted to include knee and toe clearance under bathroom fixtures....
-
1132A.5.2 Strike edge maneuvering space at doors
Twenty-four inches (610 mm) is preferred for strike edge clearance....
-
1010.1.4 Floor elevation
There shall be a floor or landing on each side of a door. Such floor or landing shall be at the same elevation on each side of the door. Landings shall be level except for exterior...
-
1132A.5.2 Strike edge maneuvering space at doors
Twenty-four inches (610 mm) is preferred for strike edge clearance....
-
11B-609.4 Position of grab bars
The height of the lower grab bar on the back wall of a bathtub shall comply with Section 11B-607.4.1.1 or 11B-607.4.2.1....
-
Clearance: ADA Standard Section 604.9.2
Section 604.9.2 covers the current ADA Standards for clearances around children's use water closets.
-
307.4 Vertical Clearance
307.4 Vertical Clearance. Vertical clearance shall be 80 inches (2030 mm) high minimum....
-
Are spring hinges and gravity hinges considered “closers” in determining the size of maneuvering clearances?
Some approaches require additional maneuvering clearances when a door or gate is equipped with a closer because of the additional force that must be counteracted in proceeding through doors...
-
Access-Able Designs Rear Mount Tub Transfer Bench w/o Legs SH-414
Mounts most bathtub walls without the need for wall re-enforcement (with proper mounting hardware). Available with phenolic top (shown) ....
-
305.7 Maneuvering Clearance
Where a clear floor or ground space is located in an alcove or otherwise confined on all or part of three sides, additional maneuvering clearance shall be provided in accordance with 305.7.1...
-
305.7 Maneuvering Clearance
Where a clear floor or ground space is located in an alcove or otherwise confined on all or part of three sides, additional maneuvering clearance shall be provided in accordance with 305.7.1...
-
305.7 Maneuvering Clearance
Where a clear floor or ground space is located in an alcove or otherwise confined on all or part of three sides, additional maneuvering clearance shall be provided in accordance with 305.7.1...
-
Knee and Toe Space Depth
[See subsections ...]
-
Clearance: ADA Standard Section 604.3
Section 604.3 covers the current ADA Standards for clearances around water closets and in toilet compartments.
-
11B-233.3.1.2.6.5 Additional requirements.
Door maneuvering clearance complying with Section 11B-809.8. 6. Water closet seat height complying with Section 11B-809.10.7.4. 7....
-
307.4 Vertical Clearance
Vertical clearance shall be 80 inches (2030 mm) high minimum. Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches (2030 mm) high....
-
1991 / 1994 ADA Standards - Plan Review Tool - Plumbing Fixtures
1991 / 1994 ADA Standards - Plan Review Tool - Plumbing Fixtures Click here to view/download the pdf "1991 / 1994 ADA Standards - Plan Review Tool - Plumbing Fixtures" (323...
-
McGuire Manufacturing Co., Inc. 1149WC: Offset with 149 Flat Grid Strainer
Offset sink strainer with chrome plated flat grid wrought brass strainer 1 3/4" x 2 15/16" OD.
-
M4
On the latch, pull side of the door, is there at least 18 inches clearance provided if the door is not automatic or power operated?...
-
H4
On the pull side of the door, is there at least 18 inches clearance provided on the latch side if the door is not automatic or power-operated?...
-
Vertical Clearance [4.6.5]
Vertical clearance of at least 98 inches is based on the height necessary for personally-owned vans....
