Section 608.5.1 covers the current ADA Standards for controls in transfer type shower compartments.
Search Results "Clear Floor Space"
-
Transfer Type Shower Compartments: ADA Standard Section 608.5.1
-
11B-608.5.1 Transfer type shower compartments
compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1219 mm) maximum above the shower floor...
-
11B-604.9.5 Flush controls
Hand operated flush controls shall comply with Sections 11B-309.2 and 11B-309.4 and shall be installed 36 inches (914 mm) maximum above the finish floor....
-
11B-608.5.1 Transfer type shower compartments
compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches (1219 mm) maximum above the shower floor...
-
11B-604.9.5 Flush controls
Hand operated flush controls shall comply with Sections 11B-309.2 and 11B-309.4 and shall be installed 36 inches (914 mm) maximum above the finish floor....
-
4.8.4(2)
(2) The landing length shall be a minimum of 60 in (1525 mm) clear....
-
Wading pools. (Section-by-Section Analysis)
Several commenters felt that the required clear deck space surrounding a pool provided sufficient space for a sloped entry during alterations....
- American Specialties Recessed Paper Towel Dispenser 6457
-
M301.2.1, M302.2.1 Transfer Height
Transfer Height Proposed requirement: The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured from the floor...
- Activar JL Industries Cosmopolitan Series 2035S21 Stainless Steel Fire Extinguisher Cabinet
-
Building Guidelines and Standards are needed for Accommodations of Low Vision Persons
All these things should be easily found by the person who negotiates these spaces....
-
11B-405.9.1 Reserved
[2010 ADAS] 405.9.1 Extended Floor or Ground Surface. ...
-
11B-405.9.1 Reserved.
[2010 ADA Standards] 405.9.1 Extended Floor or Ground Surface....
-
F - number system
F - number system The F - number system, ASTM E 1155, Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers, was developed primarily to aid in the construction...
-
Alterations: ADA Standard Section 202.3
Section 202.3 covers the most current requirements for alterations in existing building and facilities.
-
7.3 Imaging System Accessibility Configuration Examples and Concerns
(or raising the room floor)....
-
4.3.4 Knee and Toe Clearances
4.3.4 Knee and Toe Clearances Adequate space without an obstruction under a design element to the floor is essential for WhMD users to approach sufficiently close in a forward direction...
-
405.7.3 Length
The landing clear length shall be 60 inches (1525 mm) long minimum....
-
405.7.3 Length
The landing clear length shall be 60 inches (1525 mm) long minimum....
-
11B-405.7.3 Length
The landing clear length shall be 60 inches (1524 mm) long minimum....
-
11B-405.7.3 Length
The landing clear length shall be 60 inches (1524 mm) long minimum....
-
11B-405.7.3 Length
The landing clear length shall be 60 inches (1524 mm) long minimum....
-
EXTREME WEATHER
Cooling centers are air conditioned spaces such as senior centers, community centers, public libraries, and other public facilities that typically operate during daytime hours and are free...
-
Technical Infeasibility
altering a load-bearing member that is an essential part of the structural frame; or because other existing physical or site constraints prohibit modification or addition of elements, spaces...