., comply with the Access Board's standards where applicable....
Search Results "ADA Standard"
-
G.12 - May an agency exempt an acquisition from the requirements of Section 508 if such procurement is undertaken to comply with the Government Paperwork Elimination Act (GPEA)?
-
Door Hardware
The ANSI standard also recognizes this point....
-
1.1.8.1 Findings and filings
Cities, counties, cities and counties, and fire departments shall file the amendments, additions or deletions, and the findings with the California Building Standards Commission at 2525...
-
C102.7.2 ITU-T Recommendation E.161
Advisory C102.7 International Telecommunications Union Telecommunications Standardization Sector (ITU-T). ...
-
C102.5 IETF
Copies of the referenced standard may be obtained from the Internet Engineering Task Force (http://www.ietf.org)....
-
210 Stairways
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different 4.1.3(4) Interior...
-
3.3.15.3 Side (lateral) reach – over an obstruction depth of 610 mm
For heights that approximated the U.S. standard of 1170 mm (46 in.), only 31% of the manual wheelchair users, 24% of the power wheelchair users and 13% of the scooter users could reach 610...
-
Are freight or service elevators required to comply?
Where provided, they must comply with the Standards....
-
§ 35.151(k)(2) Alterations to detention and correctional facilities.
Alterations to jails, prisons, and other detention and correctional facilities shall comply with the 2010 Standards except that public entities shall provide accessible mobility features...
-
M102.1 Defined Terms (Section-by-Section Analysis)
The Access Board sought input in question six in the preamble of the MDE NPRM, on whether there were other terms in the proposed standards that should be defined. NPRM, 77 FR at 6920....
-
3.3.14 Grip Strength
A comparison with the ADA-ABA permissible force limit for operating controls showed that more than 95% of the sampled WhMD users who were able to perform a power grip could exert a maximum...
-
E201.1 Scope (Section-by-Section Analysis)
This provision is consistent with existing 508 Standards § 1194.2....
-
Maneuvering Space in Load and Unload Areas
Sections 234.2 and 1002.3 of the 2010 Standards require that a level wheelchair turning space be provided at the load and unload areas of each amusement ride....
-
WHAT HAS CHANGED THE MOST?
Policies, Procedures, and Practices Service animals Mobility devices Ticketing Physical Access and Barrier Removal 2010 Standards...
-
Feminine product dispensers
See Standards § 4.27.4....
-
OCCUPANT NOTIFICATION SYSTEMS
People with limited mobility can hear standard alarms and voice announcements and can see activated visual notification appliances (strobe lights) that warn of danger and the need to evacuate...
-
E202.6.3 Alternative Means
Where conformance to one or more requirements in the Revised 508 Standards imposes an undue burden or a fundamental alteration in the nature of the ICT, the agency shall provide individuals...
-
§ 36.302(f)(1)(i)
(i) For the purposes of this section, “accessible seating” is defined as wheelchair spaces and companion seats that comply with sections 221 and 802 of the 2010 Standards along with any...
-
Doors to Hazardous Areas (Reserved) [4.29.3] and Stairs (Reserved) [4.29.4]
Earlier accessibility standards once contained a requirement for these areas....
-
Do drinking fountains pose hazards as protruding objects?
Cantilevered units at standard heights for people who stand must be recessed or protected as protruding objects....
-
Are locks operated by keys prohibited due to the pinching or twisting of the wrist their operation typically requires?
No, non-fixed portions of door or gate hardware, including keys and access cards, are not covered by the Standards, but those that can be used without pinching or turning will provide easier...
-
§ 35.138(a)(1)
(1) For the purposes of this section, “accessible seating” is defined as wheelchair spaces and companion seats that comply with sections 221 and 802 of the 2010 Standards along with any...
-
§ 35.151(k)(3)
(3) With respect to medical and long-term care facilities in jails, prisons, and other detention and correctional facilities, public entities shall apply the 2010 Standards technical and...
-
1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951 (incorporated by reference, see "Referenced Standards" in Chapter 1)....