Eco-Grip Flooring Cut In and Fabrication
Search Results "Loose Fill Surface"
- Eco-Grip Flooring Video 3 of 8 Floor Cut In and Fabrication
- Eco-Grip Flooring Video 8 of 8 Floor Accessories and Floor Cleaning
- Ohio Gratings Aluminum Swaged Bar Grating Video
- Eco Grip Flooring 2min HD
- Supa-Trac Installation Video
- Ohio Gratings Informational Video
- Eco-Grip Flooring Video 1 of 8 Welcome and Subfloor Preparation
- Eco-Grip Flooring Video 2 of 8 Eco Grip Flooring Layout
- Eco-Grip Flooring Video 7 of 8 Drain Detail and Base Trim
-
Rotational Penetrometer
When the caster is released, the spring load gauge replicates the force of an individual in a wheelchair over a given surface....
-
3. Ground and floor surface treatments
Ground and floor surface treatments 4.5 Accessible routes, and spaces, including floors, walks, ramps, stairs, and curb ramps....
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951....
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951....
- National Restaurant Association - Americans with Disabilities Act Toolkit
-
Openings [§302.3]
Openings [§302.3] Openings in ground and floor surfaces, such as grates, are limited in width to prevent passage of a ½” diameter sphere....
-
1011.2.2 Surface
The surface of the clear ground space shall be firm and stable....
-
1011.2.2 Surface
The surface of the clear ground space shall be firm and stable....
- Stabilizer Solutions Natural Decomposed Granite Pathway Stabilizer
-
Scoping [4.1.2(4), 4.1.3(3)]
Requirements in 4.5 apply to accessible routes and spaces, including ramps, elevators, platform lifts, and clear floor space. These requirements apply to interior and exterior...
-
1014.3.2 Slope
The slope of the floor surface shall not be steeper than 1:48 in any direction....
-
1014.3.2 Slope
The slope of the floor surface shall not be steeper than 1:48 in any direction....
-
High work surface
All of the seating spaces/work surfaces were approximately 42" high....
-
4.3.5 Transfer Height
Tent platform surfaces that are not the same elevation as the ORAR shall be between 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the floor or ground surface adjacent to...
-
11B-504.4 Tread surface
Stair treads shall comply with Section 11B-302. Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved.