Exceptions: The rear grab bar shall be permitted to be 24 inches (610 mm) long minimum, centered on the water closet, where wall space does not permit a length of 36 inches (914 mm...
Search Results "Hose Length"
-
11B-604.5.2 Rear wall
-
Symmons Diav Two Handle Lavatory Faucet SLW-3512-1.5
FEATURES: -Two handle widespread lavatory faucet with quarter turn ceramic control components 8 - 16 inch centers for mounting 20 inch braided supply hoses Aerator, 2.2 gpm...
-
Grohe Veris Three-Hole Basin Mixer 1/2" M-Size
• GROHE StarLight® finish • SpeedClean flow control • 3/4" ceramic cartridges (90° turn) • Pressure resistant flexible connection hoses (between spout and side valves) • Swivel Spout...
-
11B-805.2.2 Beds
A 36 inch (914 mm) minimum wide clear space shall be provided along the full length of each side of the beds. [2010 ADAS] 805.3 Clear Floor or Ground Space. ...
-
607.2 Clearance
Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum....
-
407.12.1 Vertical Reference Plane (Section-by-Section Analysis)
Analysis) This section proposes that the positioning of operable parts for side reaches and forward reaches be determined with respect to a vertical reference plane, with the location and length...
-
Trailers with Two Wheels
Width and length vary, although the majority are relatively small trailers used for carrying children....
-
FAIRNESS OF SETTLEMENT
this conclusion, the Class Representatives and Class Counsel have considered the benefits of the settlement, the possible outcomes of continued litigation of these issues, the expense and length...
-
11B-805.2.2 Beds
A 36 inch (914 mm) minimum wide clear space shall be provided along the full length of each side of the beds. [2010 ADAS] 805.3 Clear Floor or Ground Space....
-
11B-805.2.2 Beds
A 36 inch (914 mm) minimum wide clear space shall be provided along the full length of each side of the beds. [2010 ADA Standards] 805.3 Clear Floor or Ground Space....
-
Do access aisle borders (in blue) have to be painted on all four sides to be considered compliant?
I would also say that both of the "end" lines would/could be within the required length. ...
-
Handrail extension requirements
Most concise demonstration of how to (correctly) measure handrail extension length I've come across. No more arguing with Architects...will just send them this link....
-
407.8.2 Side Reach
The vertical reference plane shall be centered on the operable part and placed at the leading edge of the maximum protrusion of the ICT within the length of the vertical reference plane....
-
407.12.2 Side Reach
The vertical reference plane shall be centered on the operable part and placed at the leading edge of the maximum protrusion of the ICT within the length of the vertical reference plane....
-
Cross Slope
Cross Slope—The percentage of rise to length when measuring the trail tread from edge to edge perpendicular to the direction of travel....
-
Digital inclinometers (SmartTool®)
They have an accuracy of 0.1 degree and come in 2 - foot and 4 - foot lengths....
-
11B-904.4.1 Parallel approach
A clear floor or ground space complying with Section 11B-305 shall be positioned for a parallel approach adjacent to the 36 inch (914 mm) minimum length of counter....
-
11B-904.4.1 Parallel approach
A clear floor or ground space complying with Section 11B-305 shall be positioned for a parallel approach adjacent to the 36 inch (914 mm) minimum length of counter....
-
ACCESSMAT® - EN - Beach accessibility mats
Available in different widths and lengths that are connectable, AccessMat® enables safe traffic on sand, snow and grass....
-
R305.2.4 Pedestrian Refuge Islands
At cut-through pedestrian refuge islands, detectable warning surfaces shall be placed at the edges of the pedestrian island and shall be separated by a 610 mm (2.0 ft) minimum length of...
-
f-v
If a ramp is more than 30 feet long, is a level landing at least 60 inches long provided at every 30 feet of horizontal length?...
-
4d.
If a ramp is more than 30 feet long, is a level landing at least 60 inches long provided every 30 feet of horizontal length?...
-
7.4.5 Passing Spaces
A passing space must also be provided at the end of any segment of trail that meets the requirements of 7.4, if the full length of the trail does not meet the requirements. ...
-
1017.10 Trailhead Signs
This section requires trail information signs at trailheads to include information on the length of the trail or trail segment; surface type; typical and minimum tread width; typical and...
