Accessible Miniature Golf Course Holes....
Search Results "Golf Club Reach Range"
-
Accessible Miniature Golf Course Holes
-
11B-104.1.1 Construction and manufacturing tolerances
Where the requirement states a specified range, such as in Section 11B-609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate...
-
11B-104.1.1 Construction and manufacturing tolerances
Where the requirement states a specified range, such as in Section 11B-609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate...
-
Construction and Manufacturing Tolerances: ADA Standard Section 104.1.1
Section 104.1.1 of the ADA Standards covers the most current information on dimensions in regards to construction and manufacturing tolerances in the ADA Standards.
-
302.8 With Limited Reach and Strength
Where a manual mode of operation is provided, ICT shall provide at least one mode of operation that is operable with limited reach and limited strength....
-
302.8 With Limited Reach and Strength
Where a manual mode of operation is provided, ICT shall provide at least one mode of operation that is operable with limited reach and limited strength....
-
1.1.2
1.1.2 When a dimension range is the regulatory requirement use the midpoint of the range as the drawing dimension....
-
Temporary Facilities
Access to temporary facilities on a golf course may be achieved through either an accessible route or golf car passage....
-
Miniature Golf Facilities
Word Fillable Form (1.0MB) Word Non-Fillable Form (1.0MB) PDF Non-Fillable Form (0.5MB)
-
F238.2.2 Putting Greens
Putting greens shall be designed and constructed so that a golf car can enter and exit the putting green....
-
11B-238.2.2 Putting greens
Putting greens shall be designed and constructed so that a golf car can enter and exit the putting green. ...
-
238.2.2 Putting Greens
Putting greens shall be designed and constructed so that a golf car can enter and exit the putting green....
-
11B-238.2.2 Putting greens
Putting greens shall be designed and constructed so that a golf car can enter and exit the putting green. ...
-
11B-238.2.2 Putting greens
Putting greens shall be designed and constructed so that a golf car can enter and exit the putting green....
-
238.2.2 Putting Greens
Putting greens shall be designed and constructed so that a golf car can enter and exit the putting green....
-
407.8.2.1 Unobstructed Side Reach
Where the operable part is located 10 inches (255 mm) or less beyond the vertical reference plane, the operable part shall be 48 inches (1220 mm) high maximum and 15 inches (380 mm)...
-
407.12.2.1 Unobstructed Side Reach
Where the operable part is located 10 inches (255 mm) or less beyond the vertical reference plane, the operable part shall be 48 inches (1220 mm) high maximum and 15 inches (380 mm)...
-
F238.2.3 Weather Shelters
Where provided, weather shelters shall be designed and constructed so that a golf car can enter and exit the weather shelter and shall comply with 1006.4....
-
238.2.3 Weather Shelters
Where provided, weather shelters shall be designed and constructed so that a golf car can enter and exit the weather shelter and shall comply with 1006.4....
-
Accessible Practice Putting Greens, Practice Teeing Grounds, and Teeing Stations at Driving Ranges
Accessible Practice Putting Greens, Practice Teeing Grounds, and Teeing Stations at Driving Ranges....
-
11B-238.2.3 Weather shelters
Where provided, weather shelters shall be designed and constructed so that a golf car can enter and exit the weather shelter and shall comply with Section 11B-1006.4....
-
11B-238.2.3 Weather shelters
Where provided, weather shelters shall be designed and constructed so that a golf car can enter and exit the weather shelter and shall comply with Section 11B-1006.4. ...