Swinging doors and gates shall have maneuvering clearances complying with Table 404.2.4.1....
Search Results "Bathtub Clearance"
Commonly Searched Documents
- 
    
  
  404.2.4.1 Swinging Doors and Gates
  
- 
    
  
  11B-607.6 Shower spray unit and water
  Bathtub shower spray units shall deliver water that is 120°F (49°C) maximum. Advisory 11B-607.6 Shower spray unit and water.... 
- 
    
  
  305.7 Maneuvering Clearance
  305.7 Maneuvering Clearance.... 
- 
    
  
  H8
  If lavatories are provided, does at least one have at least a 29 inch high clearance under the front apron with the top of the rim no more than 34 inches above the floor?... 
- 
    
  
  11B-610.4 Structural strength
  Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device,... 
- 
    
  
  610.4 Structural Strength
  Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device,... 
- 
    
  
  610.4 Structural Strength
  Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device,... 
- 
    
  
  610.4 Structural Strength
  610.4 Structural Strength. Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat,... 
- 
    
  
  11B-610.4 Structural strength
  11B-610.4 Structural strength. Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the... 
- 
    
  
  11B-610.4 Structural strength
  Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device,... 
- Figure 610.2 Bathtub Seats – Drawing from the U.S. Access Board
- 
    
  
  11B-1003.3 Clearances
  Clearances at boat slips and on boarding piers at boat launch ramps shall comply with Section 11B-1003.3. [2010 ADAS] Advisory 1003.3 Clearances. ... 
- 
    
  
  11B-1003.3 Clearances
  Clearances at boat slips and on boarding piers at boat launch ramps shall comply with Section 11B-1003.3. [2010 ADAS] Advisory 1003.3 Clearances.... 
- 
    
  
  11B-1003.3 Clearances
  Clearances at boat slips and on boarding piers at boat launch ramps shall comply with Section 11B-1003.3. Advisory 11B-1003.3 Clearances.... 
- 
    
  
  408.4.3 Platform to Hoistway Clearance
  The platform to hoistway clearance shall comply with 407.4.3.... 
- 
    
  
  408.4.3 Platform to Hoistway Clearance
  The platform to hoistway clearance shall comply with 407.4.3.... 
- 
    
  
  11B-809.10.5.2 Reinforcement for grab bars
  Where bathtubs are installed without surrounding walls reinforcement shall be provided for floor-mounted grab bars. 2.... 
- Access-Able Designs Rear Mount Tub Transfer Bench w/o Legs SH-414
- 
    
  
  General: ADA Standard Section 609.1
  Section 609.1 of the ADA Standards covers information in the current ADA Standards for grab bars in toilet facilities and bathing facilities. 
- 
    
  
  Plumbing Fixtures and Accessories: ADA Standard Section 213.3
  Section 213.3 covers scoping requirements in the current ADA Standards for plumbing fixtures and accessories. 
- 
    
  
  11B-610 Seats
  [See subsections ...] 
- 
    
  
  11B-609.1 General
  Grab bars in toilet facilities and bathing facilities shall comply with Section 11B-609. 
- 
    
  
  11B-213.3 Plumbing fixtures and accessories
  Plumbing fixtures and accessories provided in a toilet room or bathing room required to comply with Section 11B-213.2 shall comply with Section 11B-213.3. Advisory 11B-213.3... 
- 
    
  
  4.32.3 Knee Clearances
  If seating for people in wheelchairs is provided at tables or counters, knee spaces at least 27 in (685 mm) high, 30 in (760 mm) wide, and 19 in (485 mm) deep shall be provided (see... 
