When one or more shower stalls are provided within the same dwelling units, at least one shower stall shall comply with one of the following requirements....
Search Results "Alternate Roll-in Shower"
-
1134A.6, Item 1
-
Bobrick Reversible Folding Shower Seat B-5181
SAFETY WARNING: Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended....
-
Speakman Versatile ADA Handheld Shower System SM-5490-ADA
The Speakman SentinelPro Shower Valve line is a dual element thermostatic and pressure balance shower valve line designed to provide high quality anti-scald protection....
-
Speakman Versatile Handheld Shower System SM-5060
The Speakman SentinelPro Shower Valve line is a dual element thermostatic and pressure balance shower valve line designed to provide high quality anti-scald protection....
-
American Bath Enterprises, Inc. AccessaBath Shower System
sizes available Easy to install Looks like 4 inch ceramic tile with simulated grout lines Attractive glossy finish that is easy to maintain with mild soap and water Easy to use shower...
-
4.26.3(1)
(1) Bending stress in a grab bar or seat induced by the maximum bending moment from the application of 250 lbf (1112N) shall be less than the allowable stress for the material of the...
-
4.26.3(4)
(4) Tensile force induced in a fastener by a direct tension force of 250 lbf (1112N) plus the maximum moment from the application of 250 lbf (1112N) shall be less than the allowable...
-
4.26.3(2)
(2) Shear stress induced in a grab bar or seat by the application of 250 lbf (1112N) shall be less than the allowable shear stress for the material of the grab bar or seat. If the...
-
4.26.3(3)
(3) Shear force induced in a fastener or mounting device from the application of 250 lbf (1112N) shall be less than the allowable lateral load of either the fastener or mounting...
-
11B-610.3.2 L-shaped seats
FIGURE 11B-610.3.2 L-SHAPED SHOWER SEAT...
-
Symmons® Allura Tub/Hand Shower System S-4705
Tub spout, wall/hand shower with flexible metal hose, in-line vacuum breaker, wall connection, cradle for hand shower mounting....
-
11B-809.10.6.3 Floor space
A clear maneuvering space 30 inches (762 mm) wide minimum by 48 inches (1219 mm) minimum in length shall be located outside the shower, with the width flush with the control wall and the...
-
610.3.2 L-Shaped Seats
Figure 610.3.2 L-Shaped Shower Seat...
-
610.3.2 L-Shaped Seats
[ECTCR UFAS 4.21.3, Fig. 36, 4.34.5.5(2)] Figure 610.3.2 L-Shaped Shower Seat...
-
Check-In and Check-Out Procedures
Instead, you should inform the guest what services – including alternate format materials such as Braille, large print, and audio cassette versions of printed material normally provided...
-
American Standard FloWise® Commercial Shower System Kit
Commercial shower system kits make life easier for specifiers to create complete shower systems without the hassle of selecting different components....
-
American Specialties Folding Shower Seat 8205-L
FOLDING SHOWER SEAT 8205-L (Left Hand) Meets ADA Accessibility Guidelines and the needs of the physically disabled and elderly....
-
Electronic File(s) As An Alternate Format
A growing number of people who are blind or have low vision prefer to receive materials in electronic format (on computer disk, USB drive, or by email). Some people listen to the...
-
Guest Room Doors and Doorways: ADA Standard Section 224.1.2
Section 224.1.2 covers scoping requirements in the current ADA Standards for transient lodging guest room doors and doorways.
-
American Specialties Folding Shower Seat 8208-R
FOLDING SHOWER SEAT 8208-R Similar to 8206, but seat is fabricated of stainless steel, satin finish, slatted design....
-
5.1.2 Level or Sloped Entry
Camp shelters providing roll-in access shall have a level or sloped entry that complies with the FSORAG Outdoor Recreation Access Route technical provisions if the camp shelter is in a campground...
-
Bobrick Folding Shower Seat B-5191
SAFETY WARNING: Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended....
-
1134A.6, Item 1.1
1.1 The shower stall shall measure at least 42 inches wide by 48 inches deep (1067 mm by 1219 mm) with an entrance opening of at least 36 inches (914 mm); or...
-
1134A.6, Item 1.1
The shower stall shall measure at least 42 inches wide by 48 inches deep (1067 mm by 1219 mm) with an entrance opening of at least 36 inches (914 mm); or...
