The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall....
Search Results "ALI: Automatic Location Identification"
Commonly Searched Documents
-
604.5.1 Side Wall
- AMTC HYBRIDFLUSH® Sidemount Flushometer
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall. ...
- BEA Inc. PBDGP Series Vestibule Push Plate (Push to Open)
-
§ 37.91 Wheelchair locations and food service on intercity rail trains
[See subsections ...]
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall. ...
-
11B-704.3 Volume control telephones
An automatic reset shall be provided. Volume control telephones shall be equipped with a receiver that generates a magnetic field in the area of the receiver cap....
-
11B-704.3 Volume control telephones
An automatic reset shall be provided. Volume control telephones shall be equipped with a receiver that generates a magnetic field in the area of the receiver cap....
- Figure 703.4.2 Location of Tactile Signs at Doors – Drawing from the U.S. Access Board
- Selectronic Exposed Hard-Wired AC Toilet 1.1 gpf Flush Valve
- Wikk Industries Ingress'r Automatic Door Control
-
11B-704.3 Volume control telephones
An automatic reset shall be provided. Volume control telephones shall be equipped with a receiver that generates a magnetic field in the area of the receiver cap....
-
703.4 Installation Height and Location
Signs with tactile characters shall comply with 703.4.
-
703.4 Installation Height and Location
Signs with tactile characters shall comply with 703.4.
-
Signage [4.6.4]
Accessible spaces must be designated by the access symbol, which can be mounted on walls, posts, or from garage ceilings so that it is not obscured by vehicles parked in the space....
-
Can accessible spaces be parallel instead of perpendicular?
The Standards do not specifically require that accessible spaces be perpendicular instead of parallel, but perpendicular parking spaces are preferred at facilities located on sites because...
- TownSteel Video for Overview of Lockdown Feature
- TownSteel Video for Installing RFID Lock FME Series
- TownSteel Video for Initializing RFID Lock
- TownSteel Programming Video for the RFID Lock
-
T504 Fare Collection Devices
See 2010 NPRM, Section T502.3; see also 36 CFR 1192.33 (“Where provided, the farebox shall be located as far forward as possible[.]”)....
-
Vehicle Parking
Because new recreation site locations should be chosen carefully to ensure accessibility requirements can be met, this exception should hardly ever be taken....
-
Three Additional Features for Van-Accessible Parking Spaces
symbol of accessibility mounted high enough so the sign can be seen when a vehicle is parked in the space 96" min. width access aisle, level (max. slope 1:50 in all directions), located...
-
10.3.1(4)
Such signs shall be placed in uniform locations at entrances within the transit system to the maximum extent practicable....
