[See subsections ...]
Search Results "ALI: Automatic Location Identification"
Filters
Commonly Searched Documents
-
T213 Seats
-
Figure 604.5.1 Side Wall Grab Bar at Water Closets – Drawing from the U.S. Access Board
-
Horton Automatics EasyAccess® Series 7100 for ADA Low Energy Applications
Door system for standard ADA low energy applications Compliant with ANSI A156.19, A117.1 and Americans With Disabilities Act of 1990 Standard system features &...
-
11B-704.3 Volume control telephones
An automatic reset shall be provided. Volume control telephones shall be equipped with a receiver that generates a magnetic field in the area of the receiver cap....
-
11B-704.3 Volume control telephones
An automatic reset shall be provided. Volume control telephones shall be equipped with a receiver that generates a magnetic field in the area of the receiver cap....
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall....
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall....
-
§ 37.91 Wheelchair locations and food service on intercity rail trains
[See subsections ...]
-
11B-704.3 Volume control telephones
An automatic reset shall be provided. Volume control telephones shall be equipped with a receiver that generates a magnetic field in the area of the receiver cap....
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall. ...
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall. ...
-
Signage [4.6.4]
Accessible spaces must be designated by the access symbol, which can be mounted on walls, posts, or from garage ceilings so that it is not obscured by vehicles parked in the space....
-
Wikk AccessAbility ™ “Long Ranger” 868 Mhz Transmitters and Receivers
Wikk AccessAbility ™ “Long Ranger” 868 Mhz Transmitters and Receivers can penetrate through stainless, aluminum, brass or steel bollards as well as concrete walls, floors and metal...
-
Three Additional Features for Van-Accessible Parking Spaces
symbol of accessibility mounted high enough so the sign can be seen when a vehicle is parked in the space 96" min. width access aisle, level (max. slope 1:50 in all directions), located...
-
703.4 Installation Height and Location
Signs with tactile characters shall comply with 703.4.
-
703.4 Installation Height and Location
Signs with tactile characters shall comply with 703.4.
-
Stanley SB600 Bifolding Door
The SB600 Series is a retrofit-ready or new construction automatic bifolding door that allows for two-way traffic where there are currently restricted rough openings....
-
Figure 703.4.2 Location of Tactile Signs at Doors – Drawing from the U.S. Access Board
-
Accessible Parking Spaces for Cars
Accessible parking spaces for cars have at least a 60-inch-wide access aisle located adjacent to the designated parking space....
-
Can accessible spaces be parallel instead of perpendicular?
The Standards do not specifically require that accessible spaces be perpendicular instead of parallel, but perpendicular parking spaces are preferred at facilities located on sites because...
-
T504 Fare Collection Devices
See 2010 NPRM, Section T502.3; see also 36 CFR 1192.33 (“Where provided, the farebox shall be located as far forward as possible[.]”)....
-
11B-707.7.1 Visibility
SECTION TITLE NOTES 11B-707.7.1 Visibility. Amends technical requirements to correct...
-
Clear Floor Space [4.34.2] and Reach Ranges [4.34.3]
Clear Floor Space [4.34.2] and Reach Ranges [4.34.3] Either a forward approach or a parallel approach to the ATM must be provided. Maximum reach heights to controls are based on...
-
11B-707.6 Input
11B-707.6 Input. Input devices shall comply with Section 11B-707.6.
