Consideration should also be given to light sources and the ambient lighting to prevent glare on sign surfaces....
Search Results "Fire-Building Surface"
-
Finish and Contrast [4.30.5]
-
Roughness Measurement
The surface profiles were measured with a custom-built pathway measurement tool (PathMeT), which was created from a power WC frame that was instrumented with a wheel encoder and an Acuity...
-
1016.5 Obstacles
EXCEPTION: Where the surface is other than asphalt, concrete, or boards, obstacles shall be permitted to not exceed 1 inch (25 mm) in height measured vertically to the highest point....
-
1014.2.1 Transfer Access
The surface of the clear ground space is required to be firm and stable, and to slope not steeper than 1:48 in any direction....
-
1.1.16 Alternate measurement tools
Measure running slope along the same lines of measurements as stated in Section 1.1.13 Although the F - number system can be used to measure surface flatness for smooth surfaces it requires...
-
M102.1 Defined Terms
The following terms are defined in the proposed standards: Enforcing authority, medical diagnostic equipment, operable parts, and transfer surface....
-
Section 35.151(i) Curb ramps (Section-by-Section Analysis)
Upon further consideration, however, the Department has concluded that the regulation should acknowledge that there are times when there are transitions from sidewalk to road surface that...
-
11B-1002.5 Amusement ride seats designed for transfer
Where possible, designers are encouraged to locate the ride seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
11B-1009.5.7 Grab bars
Where a grab bar is provided on each step, the tops of gripping surfaces shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above each step and transfer platform....
-
§ 38.159(c)(8) Handrails
grasp them from outside the vehicle while starting to board, and to continue to use them throughout the boarding process, and shall have the top between 30 inches (760 mm) above the ramp surface...
-
11B-1002.5 Amusement ride seats designed for transfer
Where possible, designers are encouraged to locate the ride seat no higher than 17 to 19 inches (430 to 485 mm) above the load and unload surface....
-
11B-705.1.1.2 Dome spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 2.3 inches (58 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
11B-1009.5.7 Grab bars
Where a grab bar is provided on each step, the tops of gripping surfaces shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above each step and transfer platform....
-
Perkins Access Digital Accessibility Services
Accessibility Consulting for Buildings and Spaces Perkins Access can help the physical spaces in your buildings achieve optimal access for individuals with disabilities....
-
§35.151 New Construction and Alterations
Thus, the Department has adopted the section 504 principles for these types of leased buildings....
-
§35.151 New construction and alterations. (Section-by-Section Analysis)
Thus, the Department has adopted the section 504 principles for these types of leased buildings....
-
Physical and Mental Qualification Standards
An employer may establish physical or mental qualifications that are necessary to perform specific jobs (for example, jobs in the transportation and construction industries; police and fire...
-
Harassment
harassment is illegal when it is so frequent or severe that it creates a hostile or offensive work environment or when it results in an adverse employment decision (such as the victim being fired...
-
382.119 What information must carriers give individuals with vision or hearing impairment on aircraft?
., fire or bomb threat)....
-
5. What will happen after I ask for a reasonable accommodation?
Your employer can't legally fire you, or refuse to hire or promote you, because you asked for a reasonable accommodation or because you need one....
-
Who has Obligations
In some cases it is difficult to determine whether a particular entity that is providing a public service, such as a library, museum, or volunteer fire department, is in fact a public entity...
-
General: ADA Standard Section 210.1
Section 210.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for stairways.
-
Counters: ADA Standard Section 227.3
Section 227.3 covers scoping requirements in the current ADA Standards for counters.
-
General: ADA Standard Section 407.1
Section 407.1 of the ADA Standards covers information in the current ADA Standards for elevators.
