Multiple reflective surfaces available Mirror comes with a 15 year warranty against silver spoilage Product Specs Mirror: 1/4" thick type 1 transparent flat type, class 1 - clear...
Search Results "Door Clear Width"
Commonly Searched Documents
- AJW Architectural Products U719 96"W x 48"H J-Mold Mirror - Four Sided Frame - Plate Glass
- Lutron Sivoia QS Wireless Shading System
- Symmons Temptrol II (BP Series) Shower System BP-56-500-B30-V
- Inpro Corporation SignScape® Regulatory Signs
- Jacknob Corp. 6069 ADA Latch & Slide Partition Hardware with "Occupied" Indicator
-
Physical Accessibility
The construction and design standards provide information, for example, about the required width of bathroom stalls, how steep a ramp may be, and the required height of countertops and tables...
-
Viewing Areas
The clear ground space and turning space may overlap. The turning space requirement is the same as ABAAS section 304.3....
- Independent Living Resource Center of Northeast Florida (ILRC) - Jacksonville, FL
-
11B-403.3 Slope
A sloping sidewalk with a running slope in excess of 5% is excluded from ramp requirements for landings and handrails but it must comply with cross-slope and width requirements. ◼...
-
1007.2 Accessible Routes
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (815 mm) minimum. 3....
-
1007.2 Accessible Routes
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (815 mm) minimum. 3....
-
Treads and Risers [4.9.2], Nosings [4.9.3]
Uniformity is important not only between steps but along each step; curved stairs, where the width of each tread varies, do not meet this requirement....
-
F216.13 Trailhead Signs
The technical requirements in 1017.11 require the signs to include information on the length of the trail or trail segment; surface type; typical and minimum tread width; typical and minimum...
-
Station 4-Acceleration
judge whether gaps in oncoming traffic provide sufficient time to cross the roadway safely, based on the speed of oncoming motor vehicles, their own acceleration capabilities, and the width...
-
How to Measure Transfer Surface Height
The lower wheelchair illustrates a typical diagonal transfer.24 Figure 11: Corner radii of a medical examination table The depth and width are measured along the centerlines of...
- Bobrick Narcotics Cabinet B-7316
-
Effect on Removal of Barriers in Existing Facilities: ADA Standard Section 101.2
Section 101.2 of the ADA Standards covers the effects of the removal of barriers in existing facilities.
- Inpro Corporation JointMaster® AR Series Seal Expansion Joint Systems
- Behavioral Safety Products #FV600 Ligature Resistant Flush Valve Cover
- Hussey Seating Company Skid-Mounted and Companion Chairs
-
216 and 703 Signs
signs in parking facilities (except those identifying accessible parking spaces and means of egress); and exterior signs identifying permanent rooms and spaces that are not located at the door...
-
Section I: Elevators
__________________________ Location name:______________________ I Elevators Yes No N/A Comments/Remedies I1 Is the elevator car door...
-
206.4 Entrances
Entrance doors, doorways, and gates shall comply with 404 and shall be on an accessible route complying with 402. EXCEPTIONS: 1....
-
F206.4 Entrances
Entrance doors, doorways, and gates shall comply with 404 and shall be on an accessible route complying with 402. EXCEPTIONS: 1....