This section requires constructed elements on trails, resting intervals, and passing spaces to comply with the technical requirements for protruding objects in 307 of the Architectural Barriers...
Search Results "Line Spacing (VMS)"
-
1017.9 Protruding Objects
-
4.7.10 DIAGONAL CURB RAMPS
The bottom of diagonal curb ramps shall have 48 in (1220 mm) minimum clear space as shown in Fig. 15(c) and (d)....
-
213.3.1 Toilet Compartments
A toilet compartment is a partitioned space that is located within a toilet room, and that normally contains no more than one water closet....
-
308.3.1 Unobstructed
Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1220 mm) maximum and the low side...
-
2.8 Effects of Luminance Contrast on Visual Detection and Conspicuity of Detectable Warnings
These data are shown on the figure by the filled diamond symbols and a solid trend line....
- Delta Single Handle High-Arc Lavatory Faucet 559HA-DST
- Moen M–BITION Chrome One-Handle Lavatory Faucet 8430
- Moen M–BITION Classic Brushed Nickel One-Handle Lavatory Faucet 8437CBN
- Sargent 8800 Rim Exit Device
- Kompan, Inc. ELE400020 - Stinger Spring Rider
- Moen M–BITION Chrome One-Handle Lavatory Faucet 8400
- Kompan, Inc. ELE400019 - Speeder Spring Rider
- Smith System Husky Round Activity Table
-
§382.57(c)(7)(i) Visibility
The display screen must be visible from a point located 40 inches (1015 mm) above the center of the clear floor space in front of the automated kiosk....
-
Trailhead
An outdoor space that is designated by an entity responsible for administering or maintaining a trail to serve as an access point to the trail. ...
-
R304.5.1 Width
The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 1.2 m (4.0 ft) minimum....
-
R405.2.1 General
Space under an element between the finish surface and 230 mm (9 in) above the finish surface shall be considered toe clearance and shall comply with R405.2....
-
Chapter R3: Technical Requirements (Section-by-Section Analysis)
Chapter R3: Technical Requirements (Section-by-Section Analysis) Technical requirements specify what design criteria elements, spaces, and facilities must comply with in order to be considered...
-
§27.71(k)(7)(i) Visibility.
The display screen must be visible from a point located 40 inches (1015 mm) above the center of the clear floor space in front of the automated kiosk....
-
11B-404.2.9 Door and gate opening force
Repeals current Exception 1 for spaces not required to be accessible by general exceptions in Section 11B-203....
-
§ 382.57(c)(7)(i) Visibility
The display screen must be visible from a point located 40 inches (1015 mm) above the center of the clear floor space in front of the automated kiosk....
-
§ 27.71(k)(7)(i) Visibility
The display screen must be visible from a point located 40 inches (1015 mm) above the center of the clear floor space in front of the automated kiosk....
-
Section 2. Public use areas
"Public use areas" means interior or exterior rooms or spaces of a building that are made available to the general public....
-
EMPLOYEE WORK AREA
All or any portion of a space used only by employees and only for work. Corridors, toilet rooms, kitchenettes and break rooms are not employee work areas....